I was just wondering if the Steyr LP10 required a special adapter for filling from an air tank?
Thanks.
steyr adapter
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
- Posts: 435
- Joined: Mon Mar 01, 2004 10:50 pm
- Location: Scottsdale, AZ
- Contact:
The picture on http://www.pilkguns.com/lp10.htm sure looks like it comes with an adapter, I'll know for sure in a coupla days :)
the adapter screws into the "yoke"
http://www.pilkguns.com/yoke.htm
there is some good info on
http://www.pilkguns.com/scuba.htm
good shooting...
Poole
http://arizona.rifleshooting.com/
the adapter screws into the "yoke"
http://www.pilkguns.com/yoke.htm
there is some good info on
http://www.pilkguns.com/scuba.htm
good shooting...
Poole
http://arizona.rifleshooting.com/
-
- Posts: 5617
- Joined: Mon Mar 01, 2004 12:49 pm
- Location: Ruislip, UK
I am sure that all pistols from the top manufacturers will come with the appropriate DIN filling adaptor, normally the 232 bar version (although some air rifles may come with the 300 bar version).
When specifying the adaptor or valve for the tank ensure that it is the correct DIN version. A 300 bar gun filling adaptor will work in a 232 bar tank adaptor, but not vice versa.
When specifying the adaptor or valve for the tank ensure that it is the correct DIN version. A 300 bar gun filling adaptor will work in a 232 bar tank adaptor, but not vice versa.
-
- Posts: 107
- Joined: Sun Oct 31, 2004 1:57 pm
- Location: Marietta, GA
Steyr Fitting
It does come with the 200 bar adapter that will screw into a DIN yoke. I just got one from Scott Pilkington, and it is a nifty piece of equipment.
Neil
Neil