Page 1 of 1
Walther LP200
Posted: Mon Sep 04, 2023 7:36 pm
by rj222
i got a new to me Walther LP200 and it doesnt fill the two tanks.
#1 is # 90 o ring installed in the bottom of each cylinder (looks like a ring recess at base)
#2 appears check valves are stuck also...those can be rebuilt by pulling end cap?
broken down in SOCAL
Re: Walther LP200
Posted: Wed Sep 06, 2023 8:20 pm
by Greg Derr
Walther USA is very helpful with parts, and Buck at Pilkguns is a good man for service. Try calling Buck.
Re: Walther LP200
Posted: Thu Sep 14, 2023 3:06 pm
by rj222
Walther and Buck are gone from Pilkguns
Re: Walther LP200
Posted: Thu Sep 14, 2023 7:39 pm
by Gwhite
Marcus Mirus at Walther USA is supposed to be pretty helpful. I wonder where Buck ended up?
Re: Walther LP200
Posted: Wed Sep 27, 2023 10:54 am
by ghostrip
Apparently he opened his own shop topoftherockairguns.
Re: Walther LP200
Posted: Wed Sep 27, 2023 12:26 pm
by Gwhite
It looks like he's only working on newer Crosman rifles at the moment. One problem with starting from scratch is that he won't have access to the decades of accumulated spare parts for all sorts of air gun models that Pilkington has. Crosman parts can be obtained quickly & easily in the US. Before Buck can work on the Steyr, Morini, IZH & Tau BRNO pistols Pilkington supports, Buck will need parts, and in some cases, specialized tools.