Page 1 of 1
Need Anshutz 4759 Buttplate Mounting Hole Measurement
Posted: Fri Dec 23, 2022 8:40 pm
by aalbert
Helping somebody out, who is out of state, and is awaiting a set of calipers to take proper measurements. If anybody has a 4759, can you tell me what the center to center dimensions are for the mounting bolts, that fasten it to the carrier? If I could get overall height, that would be helpful too.
Thank you in advance
Re: Need Anshutz 4759 Buttplate Mounting Hole Measurement
Posted: Sat Dec 24, 2022 8:11 pm
by Redfeather
I measured mine as you show it above as : 3.700" center to center.
The threaded holes in the base that holds the part illustrated measures : 3.600".
Re: Need Anshutz 4759 Buttplate Mounting Hole Measurement
Posted: Sat Dec 24, 2022 9:28 pm
by Redfeather
Overall length is 4.200"
Overall thicknes to top of radiused edge to the flat back is .600".
Re: Need Anshutz 4759 Buttplate Mounting Hole Measurement
Posted: Sun Dec 25, 2022 10:03 am
by aalbert
Thank you for taking the time to dig things out and take the measurements ... it lets me get a head start on things, and sanity checks any other numbers I am given.
Cheers.