Page 1 of 1
Walther CPM-1 cylinders
Posted: Fri Sep 14, 2018 7:27 pm
by gunsmoke77802
So I have a cherry CPM-1 CO2 that I love. Don't shoot it much but still its a fine pistol. One now both cylinders lose CO2 in 2 days time. How or where do I go to get a repair kit for these. It's a shame to let it die. thanks
Re: Walther CPM-1 cylinders
Posted: Fri Sep 14, 2018 11:32 pm
by spektr
You might be able to put some life into the seals by using a bit of silicone based oil. Zynthdtic o rings seem to like it
Re: Walther CPM-1 cylinders
Posted: Sat Sep 15, 2018 7:01 am
by Rover
There's a long thread in "Olympic Pistol" on this very subject. Members will offer no help.
Re: Walther CPM-1 cylinders
Posted: Sat Sep 15, 2018 7:22 am
by David Levene
Rover wrote:There's a long thread in "Olympic Pistol" on this very subject.
viewtopic.php?f=4&t=58675
Re: Walther CPM-1 cylinders
Posted: Fri Oct 19, 2018 2:00 am
by Bsquareng
I would try Umarex, they are the current US rep for Walther. I had good response and service from them on parts and replacing seals for my Diana model 6.
Re: Walther CPM-1 cylinders
Posted: Fri Oct 19, 2018 8:20 am
by Rover
Go here:
http://www.carlwalther.com/page1.htm
I personally would try Walther in Germany.
The first thing I would try, though, is to see if Pilk couldn't help you.
Re: Walther CPM-1 cylinders
Posted: Mon Oct 22, 2018 8:14 pm
by m1963
A new cylinder might still be had, check here-
http://www.emrr.org.uk/2767902.html
Remove the VAT, and the price isn't too hateful. Be sure to email, or call, and confirm availability before commiting funds.
Re: Walther CPM-1 cylinders
Posted: Mon Oct 22, 2018 10:40 pm
by spektr
I had an issue with one of my P44 cylinders. It turns out it didnt like being stored for months at a time full. So I lubed the poppet valve with a bit of synthetic gun oil and exercised it empty with an allen wrench to move it 20 or 30 times.... Wiped off the excess oil and all was fine. A data point for you....