Page 1 of 1
Pardini GT 45 Loading Length
Posted: Fri Jan 15, 2016 9:51 pm
by hurt
What length seems to work best with Nosler 185? I have began to have failure to feed. I don't know if my length became altered because for many years i had no problems. I loaded some ball for 1911 and must have not got my length correct...and i can't find my records. It catches along the top of the bullet.
Re: Pardini GT 45 Loading Length
Posted: Sat Jan 16, 2016 7:25 pm
by Isabel1130
hurt wrote:What length seems to work best with Nosler 185? I have began to have failure to feed. I don't know if my length became altered because for many years i had no problems. I loaded some ball for 1911 and must have not got my length correct...and i can't find my records. It catches along the top of the bullet.
1.20 should work.
Could be your crimp. Check that first. If your total OAL is the same or shorter than factory rounds, then I doubt if OAL is your issue.
Clean and oil the gun, and if that doesn't work, then have a gun smith check the extractor. If it isn't tuned correctly, that can cause feeding problems.
Re: Pardini GT 45 Loading Length
Posted: Sat Jan 16, 2016 7:38 pm
by ghillieman
Montana Gold 185 JHP for my GT is loaded at 1.200".
Re: Pardini GT 45 Loading Length
Posted: Sun Jan 17, 2016 10:35 pm
by hurt
Thanks for the info...i will look into those solutions!
Re: Pardini GT 45 Loading Length
Posted: Fri Apr 15, 2016 10:01 am
by Shiloh
GT 45 6" - Zero 185 1.205 OAL JHP w/4.7 Solo 1000 for 50 yds.
GT-45S 6" with compensator - Zero 185 1.21 OAL JHP with 4.7 Solo 1000 or 5.0 Win 231 for 50 yards.
GT-45 6" with compensator - Zero 185 1.25 OAL LHPSWC and either 3.6 Clays or 3.6 BE for 25 yds. Seems to fix the feeding issue commonly experienced with the GT and SWC bullets.
Medium recoil spring in both guns.
Rail-mounted scopes (Aimpoint Micro)
Even tho 45 ACP, the compensator seems to reduce felt recoil.