Is there a credited way to replace the plastic trigger weight adjustment nut (Toz part #10) with a metal one? Mine is stripped and I wonder if ordering another plastic nut from Larry's guns is the only way to go.
Thanks in advance.
Toz-35 trigger weight adjustment nut
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
shaky hands
- Posts: 413
- Joined: Sun Sep 23, 2012 9:56 pm
- Location: USA
Re: Toz-35 trigger weight adjustment nut
The reason it's plastic is so the adjustments don't shift, think of it having the same effect as a nylock nut. It you replace it with a metal one, it will work the same but might move over time.
If you are stripping the plastic nut, you are proably trying to adjust the trigger to a heavier weight than it was designed for.
If you are stripping the plastic nut, you are proably trying to adjust the trigger to a heavier weight than it was designed for.
Re: Toz-35 trigger weight adjustment nut
Yes, you can change it to a metal one. Take a nut that fits the screw (M3 if I'm not mistaken) and file of two opposing faces (similar to a pyramid) so that it sits in the metal leaf and it doesn't turn when you screw it in. Mine is like that. It came with that modification previously done by a former owner.
Just use a bit of nail varnish or non permanent loctite if you find it comes unlose with time.
Hope this helps
Just use a bit of nail varnish or non permanent loctite if you find it comes unlose with time.
Hope this helps