I have read several opinions on Litschert target scopes, some saying they are among the best and others saying they were a cheaper alternative to Lyman/Unertl. I thought that I read somewhere that 1950's prices of all three brands were within a dollar or two of each other.
Any of you scope gurus have info/opinions on Litschert? (I could find nothing on a search of this forum.)
Litschert target scope
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Re: Litschert target scope
not that surprising - "TargetTalk - a place to talk about Olympic style shooting, rifle or pistol, 10 meters to 50 meters, and whatever is in between", but some posters might have experience/opinion.mcralph wrote:...(I could find nothing on a search of this forum.)
Litschert
Ralph, as mentioned your question would be better answered over on rimfire central but I'll give you my opinion, I have both.
I believe, but not positive, Litschert may have made two style scopes over the years. I suspect the "better" scope with the screw adjust objective may have been the better scope.
The other (later) scope was a cheaper alternative in that the objective adjustment rather than screw adjust slid forward and back and was locked in place by a clamping screw and was not as precise as a threaded adjust. On the lessor quality scope there is no Pope rib to keep the barrel in line as the scope recoiled. In this case the tube was grooved and a pin rode the groove to keep it in line.
These scopes though cheaper construction wise were non the less adaquate and did the job. They are a good buy for the money.
bjm
I believe, but not positive, Litschert may have made two style scopes over the years. I suspect the "better" scope with the screw adjust objective may have been the better scope.
The other (later) scope was a cheaper alternative in that the objective adjustment rather than screw adjust slid forward and back and was locked in place by a clamping screw and was not as precise as a threaded adjust. On the lessor quality scope there is no Pope rib to keep the barrel in line as the scope recoiled. In this case the tube was grooved and a pin rode the groove to keep it in line.
These scopes though cheaper construction wise were non the less adaquate and did the job. They are a good buy for the money.
bjm