Page 1 of 1
Progressive reloading press
Posted: Thu May 03, 2012 12:06 pm
by TomAmlie
Hi everyone - I'm about to take the plunge on a progressive reloading press. In addition to .223 and .308 I also want to be able to load accurately for .32 SWL. With such a small powder charge I assume that having the most accurate powder metering system is critical. Does anyone have any strong opinions (good or bad) for Dillon v. Hornady v. Lee?
Thanks,
Tom
Progressive Reloader
Posted: Thu May 03, 2012 1:21 pm
by GOVTMODEL
Started out with a Lee Pro 1000. Upside: It works. Downside: The primer system is very erratic in operation. Bought a second one; same experience as first one. Gave both away as I couldn't bring myself to accept money in return.
Purchased a Dillon RL550- no regrets.
Purchased a Dillon SDB for hardball only; no regrets.
That's the total of my experience.
Posted: Thu May 03, 2012 2:09 pm
by Barry G
I have a Dillon SDB with the extra small powder bar for .32 long and it meters W-231 1.7 gr perfectly.
Reloading Press
Posted: Thu May 03, 2012 3:24 pm
by Ernie Rodriguez
I have both Hornady LNL,Dillon 650 and a number of SDB presses. The Hornady LNL is used with the 32 S&WL because I can use a pistol insert for the powder measure. It accurately can throw 2 grs of powder or LESS with this pistol insert drum type. Cheers.
Posted: Sat May 05, 2012 6:57 am
by sparky
I'm a big fan of Dillon products. My Square Deal, 550, and 650 have all worked great. The couple times I need parts, Dillon's customer service was amazing, despite living on a military base overseas. They say they have a no b.s. lifetime warranty and they mean it.
If you're reloading rifle and pistol calibers on the same press and don't need huge volume, I'd look at the 550; if you do want huge volume, I'd pay the extra for a 650.
Posted: Sat May 05, 2012 8:34 am
by JamesH
I'm happy with my RL550, its versatile and easy to use - I just wish it could self index. It doesn't so if you have a brain fade or interruption and can't remember if you indexed it then you need to check - which is straightforward.
The micro bar dispenses .32 loads well enough.
The 650 is good for high volume but not so great for low volume due to the primer feed system - the RL550 and Square deal only dispense a primer if a case is present, the 650 will spit them on the floor.
Lee make good budget equipment but no-one I know who had a Lee progressive kept it very long.