Page 1 of 1
Pardini SP Ejection Problem?
Posted: Mon Mar 26, 2012 5:46 pm
by kurais
I recently purchased a used Pardini SP. It functions fine cycling ammo when fired it doesn't eject the case/cartridge when I manually cycle the action. Is this normal?
More specifically, when I pull the slide back the extractor pulls the case out of the chamber and hits the ejector part of the magazine and does not eject. I thought it could be the magazine so I ordered a new one from PardiniUSA but it too does the same thing. I guess it's not a huge problem, but I'd like to be able to clear a malfunction on the fly if I need to.
Posted: Mon Mar 26, 2012 7:08 pm
by dschaller
If you are saying that when you have an unfired round in the chamber, it does not eject, then that is normal. The only way to clear a unfired round from the gun is to drop the magazine, then retract the slide and if the round does not fall out, use your finger to push the round off the extractor to then fall out. I was also quite surprised the first time I tried to remove a "dud" round and it would not retract far enough for the bullet to exit the chamber, so it would not eject.
Posted: Mon Mar 26, 2012 10:49 pm
by kurais
Thanks. That's what I thought but found it odd. I'm used to my Benelli which ejects the round on a manual cycle of the action, and I like to have the option to clear a malfunction instead of take an alibi in timed fire, but I'm just going to hope that I don't have any misfires.
Posted: Tue Mar 27, 2012 1:33 am
by David M
Fit a new ejector and new spring.
Posted: Tue Mar 27, 2012 5:24 pm
by Coastwatcher
The casing with bullet still in is too long and the nose of the bullet will catch in the chamber. That is why a spent case will extract but not a loaded round.
Pardini SP ejection problem
Posted: Sun May 20, 2012 8:10 pm
by p38
Appears that you have your answer. I posed the same question back in early 2011?? Eventually discovered like you that the course of fire we shoot does not allow for immediate action, nor is it necessary, but to take an alibi. My Pardini has performed flawlessly the past 3yrs and am very pleased with my purchase.
Best Regards
Jay from Colonial Heights, VA
Pardini SP ejection problem
Posted: Sun May 20, 2012 8:11 pm
by p38
Appears that you have your answer. I posed the same question back in early 2011?? Eventually discovered like you that the course of fire we shoot does not allow for immediate action, nor is it necessary, but to take an alibi. My Pardini has performed flawlessly the past 3yrs and am very pleased with my purchase.
Best Regards
Jay from Colonial Heights, VA