Page 1 of 1
TOZ35M trigger adjustment
Posted: Mon Mar 12, 2012 5:15 pm
by GVJOHN
I would like to raise the trigger pull on my TOZ35M to 400-500 gm. Is this feasible? (I have turned the screw in front of the trigger guard and the pull weight goes up but it seems the cocking effort goes up as well. I'm afraid I will bend or break the cocking lever.) Anyone have a suggestion or source where I could get instructions?
Posted: Mon Mar 12, 2012 5:52 pm
by j-team
The Toz Trigger will not adjust up that high. you will strip the thread on the plastic nut in the long lever if you keep turning the weight screw.
I know this sounds crude, but you can stick a small rubber block on the frame behind the trigger shoe (like a squashable trigger stop) to increase the weight of pull. It will take a bit of trial and error cutting them to different thickness etc. and maybe different hardness rubber to achieve a good feel but it will work.
Posted: Mon Mar 12, 2012 8:42 pm
by Greg Derr
Try a pencil eraser, old school revolver trick for DA revolver shooting.
Posted: Tue Mar 13, 2012 3:33 pm
by scerir
More interesting ideas on the TOZ 35M trigger
Posted: Tue Mar 13, 2012 7:35 pm
by paulo