Page 1 of 1
Grunig Revolution II stock?
Posted: Thu Nov 10, 2011 6:28 pm
by tenring
does anyone know much about it and how it compares to the revolution III?
Thanks,
tenring
Posted: Fri Nov 11, 2011 3:34 am
by Barney
As far as I know they are both the same, except that the RS III has rubber anti vibration balls under the action adaptor and the plastic handstop rail holder. Also I think they only do nylon cheekpieces now, I know the RS and RS II you could get laminated timber ones.
Posted: Fri Nov 11, 2011 8:40 am
by tenring
Are there any bedding issues with these stocks. I have the 2213 stock and it a really great stock, but I find it temperamental finding the torque setting that will produce nice groups.
Tenring
Posted: Fri Nov 11, 2011 9:10 am
by bluetentacle
RSII was single shot only. RSIII can be made to accept repeater actions. Also, RSIII is only clear anodized, whereas RSII was available in blue or black.
Posted: Fri Nov 11, 2011 9:16 am
by KennyB
From what I've read elsewhere - one of the issues with the 20 series action could be that if you torque the front right bedding bolt too high as it can effect the bolts clamping the barrel in the action (and hence the accuracy)...
I've seen it suggested that 5 Nm is about the limit for that one bolt whereas the others can be torqued higher.
YMMV.
K.