is walther cp99 is issf compilent.

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
rajemessage
Posts: 39
Joined: Thu Aug 11, 2011 11:29 am

is walther cp99 is issf compilent.

Post by rajemessage »

Dear All

Please tel me is Walther CP99 is allowed in ISSF,
if yes then which model is allowed in ISSF.

yours sincerely
User avatar
Richard H
Posts: 2654
Joined: Mon Mar 01, 2004 11:55 am
Location: Guelph, Ontario
Contact:

Post by Richard H »

That is a toy and not even remotely a target pistol.
Fortitudo Dei
Posts: 256
Joined: Tue Mar 02, 2004 8:30 pm
Location: New Zealand

Re: is walther cp99 is issf compilent.

Post by Fortitudo Dei »

rajemessage wrote:Dear All

Please tel me is Walther CP99 is allowed in ISSF,
No - it is not compliant. It uses hard BB's rather than soft lead pellets. Hard BB's are prohibited under ISSF rules. That aside, as has been mentioned, even if it did take pellets, it would not be a competitive air pistol. It is made for fun, not for ISSF target shooting.
David Levene
Posts: 5617
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Re: is walther cp99 is issf compilent.

Post by David Levene »

Fortitudo Dei wrote:It uses hard BB's rather than soft lead pellets.
There are several models in the range that take .177 pellets.

Even those though are totally unsuitable for ISSF competition.
Spencer
Posts: 1890
Joined: Fri Feb 24, 2006 9:13 pm
Location: Sydney, Australia
Contact:

Re: is walther cp99 is issf compilent.

Post by Spencer »

rajemessage wrote:Dear All

Please tel me is Walther CP99 is allowed in ISSF,
if yes then which model is allowed in ISSF.

yours sincerely
in 4.5 mm (.177") calibre and without the optional laser, etc. the CP99 would meet the ISSF regulations, BUT:
- would be a problem (!) loading one pellet at a time
- at a max 360fps could tend to tear a lot of targets rather than punch a neat scorable hole
- nobody has published 10m grouping (that I can find) so it must be pretty bad
- unlikely to have a usable trigger for ISSF competition
- sights adjustable for windage only
- is advertised as "plinking/Fun" and would proably be laughed out of any ISSF competition (even in the black version) - not a good situation for the shooter.
Rover
Posts: 7055
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Post by Rover »

When you asked the question here...
http://www.targettalk.org/viewtopic.php?t=31088

...not one person mentioned this pistol.
Hemmers
Posts: 380
Joined: Mon Jun 25, 2007 5:06 pm
Location: UK

Re: is walther cp99 is issf compilent.

Post by Hemmers »

Spencer wrote: - nobody has published 10m grouping (that I can find) so it must be pretty bad
It's not all that bad. I had a play with one (shooting .177 target pellets) and got some decent groupings at 10m, outdoors no less, so indoors out the wind (and in the hands of a non-useless pistol shooter!) they would presumably tighten up a bit.

Nevertheless, they're not in the same league as a dedicated target pistol. It's a shorter and lighter barrel, the CO2 caplets may or may not go the distance in a 60-shot match (most likely not), and loading individual pellets would be a complete PITA as its designed to be mag-fed.

They're great fun for plinking though :D
Post Reply