Page 1 of 1
Matchguns MG2R & MG4 triggers
Posted: Fri Feb 04, 2011 5:41 am
by brakarzac
Can someone tell me how to adjust the trigger weight, without pulling the guns apart?
I would like to fine tune both my MG2R and my MG4, but I cant get access to the adjustment screws because of the springs.
Please help.
cheers
Posted: Fri Feb 04, 2011 6:07 am
by A74BEDLM
I personally can adjust mine (MG2ERF, MG2 and MG4) with no problems - You get a special long thin allen key to adjust springs in position - removing the grip gives you a bit more room but that is all that should be required. The springs will bend out of the way if needed.
Posted: Fri Feb 04, 2011 6:08 am
by ghostrip
on latest MG-2 (sn 4xxx) and on MG4 only the second weight screw (number 3) is a bit hidden but with the supplied ball head allen keys you should be able to adjust it (ball head allows the key to be used at an angle off-axis to the screw).
Posted: Fri Feb 04, 2011 12:08 pm
by buonvento
You should find a post here in Olimpic Pistol submitted by julioalperi. There is a very interesting guide in pdf. Unfortunately it is in Spanish, but I think you can easily translate it with Google.
Posted: Sat Feb 05, 2011 5:53 pm
by Tycho
Extra long? More like extra short, at least that's what came with my late guns. Just take the grip off and go behind the trigger springs with the cut-off allen key. Remember to loosen the fixation screw in the side of the frame first, and to tighten it up afterwards - the MG4 will shake loose everything in sight.