Hey guys,
I finally own my own free pistole TOZ 35m.
However, the pistole hadn't much been taken care of. So, my first task with it would be to clean and polish it thoroughly.
My problem: I don't have any description or documentation of how the TOZ can be disassembled and assembled.
Question: Does anybody have this kind of documentation for me? Or also a good description of how to clean the TOZ correctly?
Thanks in advance.
Free pistole assembling?
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Hope this helps:
http://www.potfire.com.au/compend/sptoz35.htm
It came from Pilkington's website.
To clean, just scrub the parts with powder solvent and a toothbrush. Wipe dry with a rag. Push wet then dry patches through from the rear of the barrel (no need to disassemble for this.)
http://www.potfire.com.au/compend/sptoz35.htm
It came from Pilkington's website.
To clean, just scrub the parts with powder solvent and a toothbrush. Wipe dry with a rag. Push wet then dry patches through from the rear of the barrel (no need to disassemble for this.)
-
Shooting Kiwi
- Posts: 321
- Joined: Fri Apr 20, 2007 3:33 am
- Location: New Zealand
Factory manual here: http://stevespages.com/pdf/vostok_toz_35.pdf
(I don't know who you are, Steve, but many, many thanks for putting all those manuals up!)
(I don't know who you are, Steve, but many, many thanks for putting all those manuals up!)