Page 1 of 1
Morini 84E lubrication
Posted: Wed Mar 03, 2010 3:07 am
by jsealc21
I have a morini ,but no manual. The pilkguns page does not mention any lubrication...should there be any lube anywhere in all the metal-to- metal moving parts...e.g. operating lever and breechblock ? thankyou
Posted: Wed Mar 03, 2010 4:17 am
by Nigel
Courtesy of our fine host:
http://www.pilkguns.com/tenp/cm84emanual.pdf
The manual makes no mention, I note in the 162E1 air pistol manual they mention something about "long lasting lubricants" or somesuch being applied at the factory.
Posted: Wed Mar 03, 2010 9:39 am
by Misny
I don't like metal-to-metal contact without having a lubricant in there. I use Shooter's Choice High Tech grease on my Morini 162EI, Morini 84E, and FWB 601. It does the job and I haven't noticed any ill effects.
lube
Posted: Wed Mar 03, 2010 11:09 am
by jsealc21
Are there any specific locations,and does its application require any disassembly,other than the grip?
Posted: Wed Mar 03, 2010 12:38 pm
by Mark Briggs
Do a search on my posts - a few years ago I posted a description of how to disassemble and clean the CM84E. I believe it also includes a description of where/how to lubricate on re-assembly. In essence the lubrication points are on the cocking lever and the hinge pins for the cocking lever and the breech block. White lithium grease has proven to be an excellent lubricant for this purpose.
Posted: Wed Mar 03, 2010 1:55 pm
by jsealc21
Mark Briggs wrote:Do a search on my posts - a few years ago I posted a description of how to disassemble and clean the CM84E. I believe it also includes a description of where/how to lubricate on re-assembly. In essence the lubrication points are on the cocking lever and the hinge pins for the cocking lever and the breech block. White lithium grease has proven to be an excellent lubricant for this purpose.
thankyou Mark,fantastic !! all printed out and ready to clean....a great help
Posted: Wed Mar 03, 2010 2:53 pm
by pilkguns
where is it? we will add it to the 10P files
Posted: Wed Mar 03, 2010 3:47 pm
by jsealc21
pilkguns wrote:where is it? we will add it to the 10P files
Hi Scott,if you search" Mark Briggs",it will be on page 7,nov 29,2004,author paul T,entitled cm84e breech block and firing pin...scroll down to Mark's reply. I'm sorry I don't know how to do a direct link. regards Jonathan
Posted: Wed Mar 03, 2010 4:17 pm
by LukeP