TargetTalk

Is there an ISSU rule on now high you sights can be ? I Have an ans 8002 it came with 8mm risers I do'nt think it's enough I have to cant the rifle I would like a more heads up alignment of the sights. Centra makes an adjustable riser goes from 22mm to 27mm that seems a lot. Anyone use an adjustable riser? Or should I stack two 8mm risers for a total of 16mm

the 60mm rule (7.4.2.7 C) applies to 10m and 300m ISSF rifles

Spencer

Spencer is right, 60-mm is the height limit as measured from the centre of the muzzle bore to the centre of the fore sight tunnel. Read the rules.

I would suggest you get raiser blocks that are adjustable in height using spacers so you can fine tune your head position. Centra are good but i like the new Gehmann or Tec-RHO adjustable blocks.

Peeps

Curious, where can I see the Tec-RHO product online. I was having problems finding it.

Thanks

Type in tec-HRO or Edinkillie sport services. Colin

Thank you for you replies. You guys on the right side of the pond have all the good stuff I could not find those two risers sold in the USA.

Intershoot in the UK ship to here, I've used them several times.

intershoot.co.uk

To translate the 60mm rule into riser block height, I have an 18mm Centra Duo front sight on my 2002 with a Mec bloop tube. I have 28mm (Champion's Choice 20mm and an Anschutz 8mm) of riser blocks on there which gets me to 58.9mm. Being 6'2", I'm thinking of getting Bill Earnest to make me a set that get me that last mm, and so I don't have to stack them.

Thanks Soupy 44 That tells me alot about how high is high the 20mm risers are easy to get the adjustable from over there is harder

You can also try
www.euroshooting.eu