Page 1 of 1
Printable Air Rifle Target
Posted: Sat Jul 11, 2009 12:27 pm
by pfhj
Some time back there was a contributor that had a 10 meter air rifle target reduced to 5 feet. Can someone guide me to that post or source?
Thank you!
Re: Printable Air Rifle Target
Posted: Sat Jul 11, 2009 12:34 pm
by RobStubbs
pfhj wrote:Some time back there was a contributor that had a 10 meter air rifle target reduced to 5 feet. Can someone guide me to that post or source?
Thank you!
You can do it on the Scatt software, which is a free download.
Rob.
Posted: Sat Jul 11, 2009 1:06 pm
by jhmartin
Rob ... When printing the targets on my pinter, I get an oblong target, not a round one. The border is square, but the target within is not round.
Any ideas to fix this?
Posted: Mon Jul 20, 2009 11:43 am
by luftskytter as guest
I simply use a photocopier with zoom.
Once you've made one, you can copy the others 1:1.
There are several here you can print yourself
Posted: Mon Jul 20, 2009 7:28 pm
by Bill177
Plugs
Posted: Tue Jul 21, 2009 7:13 am
by Quest1
When reducing the 10 meter rifle target to 5 meters are the standard scoring plugs useless?
Posted: Tue Jul 21, 2009 10:54 am
by paulo
As mentioned before,
http://www.scatt.com/software.htm , look under tools for Print Target, once you pick the target you need you can enter the distance by typing it yourself or using the preset increments.