Page 1 of 1
Whats the best barrel for 50/100m prone smallbore shooting?
Posted: Fri Jan 09, 2009 8:34 pm
by USAR SHOOTER
Who makes the best drop in barrels for an Anschutz 2013 for prone smallbore 50/100 meter shooting? Im thinking of using a Lilja barrel in a 1/16 twist.
Posted: Sat Jan 10, 2009 12:57 am
by ADC59
A Lilja drop-in seems like a good bet. Matt Emmons won gold and silver Olympic medals in prone with Lilja barrels and came within 1 shot of winning 2 more Olympic gold medals in 3-P.
Posted: Sat Jan 10, 2009 1:26 am
by Jordan F.
I don't think you can go wrong with any of the high end barrels really (benchmark, lilja, hart, douglas, etc) but it is really nice that lilja makes the drop in barrel for the 2013. I am not aware of too many other barrel makers that have the factory drop in for this gun so with that in mind I don't think you can go wrong with lilja. Lots of different options out there now adays too. 1:15, 1:16, 2 grove, 6 grove, reverse taper, normal taper, etc. All some things to think about (although for position type shooting I don't know how well the reverse taper would work out)
Anschutz barrel
Posted: Sun Jan 18, 2009 5:56 am
by rbs
Something that you should probably consider is buying the barrel of your choice and having it installed by a gunsmith that is familiar with the 2000 series Anschutz. The tenon to receiver fit is critical to obtain the best accuracy and I would worry that a drop in would possibly not meet that criteria, as if the tenon is too small it will distort the action. Alot of great barrel makers, the key here is to have someone that knows what they are doing install it. A huge benefit of the 2000 series action is that it easily allows the barrel to be indexed, which has shown to improve almost every barrel's performance.
Posted: Mon Jan 19, 2009 7:43 pm
by L Moore
no text
Posted: Mon Jan 19, 2009 7:44 pm
by L Moore
This might sound stupid,,but assuming that extractor slots are already cut in these barrels how can it be indexed other then either 6 or 12 o'clock?..I have heard this said before and never knew the answer...L
Posted: Mon Jan 19, 2009 9:35 pm
by 1813benny
You can only fully index if you have a cone breach cut.
Otherwise, you don't cut the extractor slots, test fire by removing the extractors from the bolt and then cut the slots after finding the optimal index.
Posted: Wed Jan 21, 2009 2:14 pm
by L Moore
Thank You,,,Now I know...The only concern I would have is the repeated use of a rod to clear the fired case while testing is being done...It troubles my mind to work from the crown anymore then I have too with a cleaning rod ,be it coated or not.......L