LP10 trigger problem

Ken4all · Post by **Ken4all** » Fri Jun 06, 2008 6:57 am

When I pull the trigger to the point where the shot is released, my trigger slightly jumps forward.
I maintain the pressure after releasing the shot but I can see the trigger jumping forward.

Did someone ever have the same problem?
Any ideas what I can check or how I can solve it?

Thanks,
Kenneth

Post by **pilkguns** » Fri Jun 06, 2008 7:20 am

you need to add slightly more engagement. this is the screw under the grip with the red paint on it.

Guest · Post by **Guest** » Mon Jun 09, 2008 2:54 am

Great thanks.

I only had to turn it CCW a realy tiny bit.
Is it normal that the factory setting (indicated with the paint) changes?