32 S&W Long WC

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
alchemist
Posts: 15
Joined: Sun Nov 05, 2006 8:49 pm

32 S&W Long WC

Post by alchemist »

Does anyone know a GOOD source for match grade reloads for the 32 S&W Long WC ?????
Guest

Post by Guest »

You are better off loading your own, as you can tune your load to your gun. The Hornady or Lapua lead wad cutters will give you the best preformance. A lot of the other stuff out there are too hard. Even if you have to start from scratch loading equipment wise, after a couple of seasons you will be money ahead. It is not difficult, a little time consuming. Most of us spend way too much time with the boob tube anyway.
gn303
Posts: 244
Joined: Sat Oct 06, 2007 4:09 am
Location: Belgium

.32S&W Long WC

Post by gn303 »

I have been reloading for all most all my shooting life, starting with the .38 WC and switched to .32 when semi-auto's in this caliber came on the market. The first reason for reloading was financial. Soon I found out it was (1) fun and (2) carefully assembled ammo out grouped the factory ammo. I would advice to get a good book an reloading and find a expierenced reloader who can guide you during your first steps. Have fun!
Post Reply