TargetTalk

My Pardini SP RF electronic started to shoot doubles. It is quite possible it is caused by trigger settings, but I could not get it back. I tried with longer and shorter 2-stage and so on. Does anybody know how to put trigger settings back to "factory defaults"?

I've experienced double shots myself. The problem I had was not trigger settings - it was oil/dirt on the micro switch.

Remedy:
Open up the small micro switch on the electronic module. It is very easy, just pick up the plastic tounges with a needle. Once the micro switch is open, wash it with with something that does not leave any residue. I'm using Heptan. Lighter fluid would probably work fine too. I tried to use a contact cleaner that containined some sort of contact lubricant, and it made things even worse. So use something that does not leave any residue - the micro switch needs to be completly dry.

Now my electronic SP1 works perfectly fine! Good luck!

/Tobias

Please tell me where the microswitch is?

You need to remove the grip and unscrew the 2 screws holding the electronic module. Once you hold the electronic module in your hand you'll see where the switch is.

Depending on the vintage of your Pardini they also have an updated module, on of our athletes had hers changed at a World Cup, seem to have solved her doubling problem.

Module was 760. I just sent gun to importer. Just have to wait what they say. And watch other shooting competitions...

jer wrote:Module was 760. I just sent gun to importer. Just have to wait what they say. And watch other shooting competitions...

Thats why it always best to have 2 8^)

I just bought IJ35. I need left handed grip and Rink mailed that I will have it at the beginning of September.