Pardini SP RF electronic shooting doubles
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Pardini SP RF electronic shooting doubles
My Pardini SP RF electronic started to shoot doubles. It is quite possible it is caused by trigger settings, but I could not get it back. I tried with longer and shorter 2-stage and so on. Does anybody know how to put trigger settings back to "factory defaults"?
I've experienced double shots myself. The problem I had was not trigger settings - it was oil/dirt on the micro switch.
Remedy:
Open up the small micro switch on the electronic module. It is very easy, just pick up the plastic tounges with a needle. Once the micro switch is open, wash it with with something that does not leave any residue. I'm using Heptan. Lighter fluid would probably work fine too. I tried to use a contact cleaner that containined some sort of contact lubricant, and it made things even worse. So use something that does not leave any residue - the micro switch needs to be completly dry.
Now my electronic SP1 works perfectly fine! Good luck!
/Tobias
Remedy:
Open up the small micro switch on the electronic module. It is very easy, just pick up the plastic tounges with a needle. Once the micro switch is open, wash it with with something that does not leave any residue. I'm using Heptan. Lighter fluid would probably work fine too. I tried to use a contact cleaner that containined some sort of contact lubricant, and it made things even worse. So use something that does not leave any residue - the micro switch needs to be completly dry.
Now my electronic SP1 works perfectly fine! Good luck!
/Tobias