TargetTalk

I have a K2 and adjusted to trigger to one stage without a stop to try to cure some problems I had. I know want to return it to 2-stage state with about equal weight on each stage with no perceptible movement after sear release. I did not touch the sear engagement.

My question is, in what order do I make the adjustments, i.e.,
1st stage length
1st stage weight
Hook weight
Trigger stop

Any help greatly appreciated
DoctorD

Can you not just do it in exactly the opposite order to how you one staged it ? Or did someone not note how they did that ? ;-)

Rob.

So Rob, you're saying I should have written down the steps? I did this about a year ago and lost my notes. I now record everything I do to the pistol including sight changes and how many shots I am getting from a fill in by practice diary.
DoctorD

Lanning R. Hochhauser wrote:So Rob, you're saying I should have written down the steps? I did this about a year ago and lost my notes. I now record everything I do to the pistol including sight changes and how many shots I am getting from a fill in by practice diary.
DoctorD

Exactly in the sequence you wrote. But the first stage must be more than 370 grams. The second stage less than 150 grams. Do not touch the trigger stop. You do not need any trigger stop with that pistol.

Thanks for the help.
DoctorD