Page 1 of 1
Where to buy 10m air pistol targets
Posted: Tue Feb 14, 2006 1:36 pm
by Zilla
Hi folks where can you buy 10m air pistol targets?? Also what is the best oil to use when its time to lubricate your air pistols/guns?
Thanks
Ross
Posted: Tue Feb 14, 2006 2:53 pm
by cdf
Our host sells Edelman targets , which are top quality , and produce very clean holes . As for lubes , that depends on what is recommended for your particular gun . Again I doubt our host would steer you wrong , as he is a world class gunsmith .
Chris
Posted: Tue Feb 14, 2006 3:52 pm
by Fred Mannis
Ross,
I second Chris' comment on Edelman targets. None of the NRA approved, U.S. manufactured, 10 m AP targets are any good. Even on a cardboard backer they produce irregular holes. They are not even fit for practice.
Fred
Posted: Tue Feb 14, 2006 4:32 pm
by Zilla
Thanks for the thoughts guys...sounds like a plan on the edelman targets...I was refering to the izh-46m specificalyl when i mentioned the oil I dont need any yet but I will eventually.
Thanks
Ross
Posted: Tue Feb 14, 2006 6:07 pm
by deleted1
Champions Choice
IZH46 Maintenance
Posted: Tue Feb 14, 2006 8:12 pm
by Fred Manni
Zilla wrote:Thanks for the thoughts guys...sounds like a plan on the edelman targets...I was refering to the izh-46m specificalyl when i mentioned the oil I dont need any yet but I will eventually.
I use 2 drops of Beeman Ultralube on my IZH piston seal every 500 pellets. Crossman Pelgun oil is also said to be good. I wipe the two bolt seals with a little lubricant at the same time. At 500-1000 pellets I lubricate the cocking lever linkage. I have used Beeman Pena-dry (moly in alcohol) and I have also used good quality gun oil for the linkage. Since the gun has a lot of steel, I wipe it down with rust inhibitng oil on a rag after use.
Fred
Posted: Mon Feb 20, 2006 7:03 pm
by AJOO8
I buy mine at nealjguns.com... 250 for 21 bucks.