Page 1 of 1
Posted: Thu Apr 21, 2005 11:20 am
by Greg Derr
On the 84E there is no provision for two stages. I have tried usong the other anchor points, they just change the spring travel. They have no effect on the "beaking point" of the trigger since it is controlled by an electomagnetic field. Greg Derr
Posted: Thu Apr 21, 2005 12:21 pm
by David Levene
I am pretty sure that the first and second stage trigger springs are the same, the only difference is the hole you put it through.
I PRESUME that if you want a light first stage and a heavy second stage you can just swap the positions of the 2 springs.
Posted: Fri Apr 22, 2005 6:43 am
by Greg Derr
Stan: No difference in felt travel on the 84E. My gun came with three springs which were all different tensions strenghts. I think I use the bottom most hole. Greg