Posted: Fri Aug 16, 2013 7:38 am
A 232 bar adpter wont screw all the way in a 300 bar tank because its shorter. So you cant even start to fill the cylinder since it doesnt seal at all.
Hope this helps
Hope this helps
A forum to talk about Olympic style shooting, rifle or pistol, 10 meters to 50 meters, and whatever is in between. Hosted by Pilkguns.com
https://targettalk.org/
Thanks and don't worry about me monitoring the gauge, I found the first experience a 'bit scary' to be honest, I intend to take the greatest of care. My diver friend who I mentioned earlier assured me that scuba tanks are certainly not a thing to mess around with.It is essential that you monitor the fill pressure on either the tank or cylinder gauge.
That's not always the case. This adaptor is an example of some of the (IMHO) stupid fittings that are available.rmca wrote:A 232 bar adpter wont screw all the way in a 300 bar tank because its shorter. So you cant even start to fill the cylinder since it doesnt seal at all.
Hope this helps
No it isn't foolproof because club tanks are frequently fitted with 300-200 adapters.A 232 bar adpter wont screw all the way in a 300 bar tank because its shorter. So you cant even start to fill the cylinder since it doesnt seal at all.
Hope this helps
The diver I've been referring to during this story works on an oil rig in the north sea, he is professional and of several years experience. When I asked him to give me some advice, he was shocked to find me, a person having no previous knowledge whatsoever of scuba tanks had one, freshly filled in the boot of my car (now in garage), I 'had' no idea of how dangerous they can be until he put me right.I stand corrected... No matter how safe one tries to make something, there is ALWAYS a way to mess it up...