short barrelled free pistol

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
elliott

short barrelled free pistol

Post by elliott »

Paging Professor Steve Swartz, Oh perfesser, where isist thouist?
Steve,
In a effort to strengthen my shooting arm and trigger finger, I've been using my Pardini Standard pistol to shoot 50 meters along with my Morini free pistol. I've noticed that I shoot better with the standard pistol. The sights don't wobble as much and the pattern of shots is much tighter, even with the greater weight of the trigger pull. As I have a back-up Morini free pistol, I was considering cutting the barrel of the free pistol down to 6 inches or so and see if that makes is as steady as the standard pistol. What are you thoughts on the matter?
Elliott Dushkin
User avatar
Freepistol
Posts: 773
Joined: Sun Feb 10, 2008 5:52 pm
Location: Berwick, PA

Post by Freepistol »

Elliott,
I think you will find the longer sight radius an asset. How do you define shooting better with the standard pistol? What are your scores?

It could be that you are focusing better on the front sight due to the distance from your eye or that your trigger control is better because the apparent movement is less.
Ben
elliott

short barrel free pistol

Post by elliott »

Ben,
The standard pistol sight picture and the free pistol sight picture are virtually the same as far as clarity of focus, size of blade sight and size of rear notch. It just seems to me the standard pistol's sights don't wobble as much, ie., the wobble zone is smaller. The scores are similar with the two different pistols, but I've been shooting the free pistol for 5 years and the standard pistol only about a month.
Elliott
User avatar
Fred Mannis
Posts: 1298
Joined: Sun Aug 29, 2004 8:37 pm
Location: Delaware

Short Barrel FP

Post by Fred Mannis »

I have a short barrel CM84E. The previous owner had the barrel cut back to reduce weight and had a long Morini compensator installed to maintain sight radius. The pistol now weighs 1130 gm with large Rink Grips and the sight radius is 360mm. Original specs are 1240 gm and 426 mm (max). I love the balance of this gun, though I have not yet shot it in competition so don't know whether it will help my score.

I think the Pardini SP weighs about 1100gm, so the effect you are experiencing may be due to weight and balance. While you can't easily reduce the weight of the CM84E, you can can change the balance and see what happens.
User avatar
Ed Hall
Posts: 236
Joined: Fri Mar 07, 2008 10:42 pm
Location: Adirondack Mtns
Contact:

Post by Ed Hall »

If you're looking at doing some work anyway, perhaps you should just move the front sight back and see what it is like before you try cutting off some of the barrel. That way, you can "try" the shorter sight radius and still be able to go back.

Take Care,
Ed Hall
Air Force Shooting Homepage
Bullseye (and International) Competition Things
User avatar
deadeyedick
Posts: 1198
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Post by deadeyedick »

VERY sensible suggestion Ed.
patro5
Posts: 17
Joined: Tue May 06, 2008 1:51 am
Location: Sydney Australia

Post by patro5 »

Back in the 80's the great gunsmith Don Nygord had put an approx. 2inch Douglas premium 22cal barrel on a Pardini free pistol, he also worked the trigger mechanism, it was the model with the small cocking lever, as I remember it was approximatly 6 or 7 inches long and sure didn't enhance the wobble over 50 metres, it was a great free pistol with with a shorter sight radius. As an aside does anyone know of a gallery of Don Nygord's various gunsmithing efforts.
zoned
Posts: 134
Joined: Mon Oct 18, 2004 11:56 am

Post by zoned »

Can anyone recommend a gunsmith who could do a proper job of cutting and crowning the barrel on a Free Pistol?
sagara wimaladharma
Posts: 38
Joined: Mon Mar 29, 2004 5:04 am
Location: Hantana mountain kandy srilanka
Contact:

shorter barrelled free pistols

Post by sagara wimaladharma »

Elliott,

1. if you shoot for fun,
I agree with you.

2. If you shoot to perform well in competitions,
I don't think you do the correct thing. pls check how good shooters do before you do the chenge.
I think longer barrels gives you good results specialy when you shoot 60.
I think wobbling is less when the gun is heavy. but you have to get used to it.

I was nearly give up free pistol sometimes back because my Toz is very heavy. but now I really like the way front sight stand up below the black globe.


Good shooting..
Sagara
sagara wimaladharma
Posts: 38
Joined: Mon Mar 29, 2004 5:04 am
Location: Hantana mountain kandy srilanka
Contact:

shorter barrol free pistol

Post by sagara wimaladharma »

sorry I missed somthing.. Lot of people bilieve wobbaling is less when the gun is heavy. but it is diffrent to person to person. it is a matter of the way we think about it & the way we take it.

the best way is, if you shoot for competitions, to strengthening your arm & body alining to the gun. you will feel great with weight.

good shooting ..
sagara
Mark Briggs
Posts: 583
Joined: Mon Mar 01, 2004 8:35 am
Location: The Frigid North - Ottawa, Canada

Post by Mark Briggs »

For some shooters additional weight is not beneficial, particularly those with shoulder injuries. I speak from experience here. The free pistol is unique in that it allows large scale customization, so in that regard we can do pretty much as we wish.

In my experimentation I've altered the centre of gravity quite significantly on my CM84E, making it very nose heavy, tail heavy and almost neutral balanced. In the end I've discovered that some nose-heaviness is required in order to provide some measure of recoil control and hence consistancy of grouping. I've also shot my CM84E with a barrel cut down to 8". The shorter barrel didn't seem to have any ill effect other than noticeably more muzzle rise on firing. I also would say it didn't have any measureable positive effect.

One point worthy of mention in this discussion is the effect the free pistol grip has on stability. Some folks shoot FP poorly because they haven't managed to make their FP grip fit well. By contrast, a standard pistol grip is much less fit-critical. This might lead the shooter to believe that other aspects of the standard pistol (heavier trigger, shorter barrel, shorter sight radius, different weight) might be the factor contributing to better success in shooting the FP match with a standard pistol when I would wager it's more likely the different grip that's accountable for the biggest portion of the differences in performance.

Just a thought, and at a penny a thought I'm not going to get rich quick! ;-)
User avatar
deadeyedick
Posts: 1198
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Post by deadeyedick »

I read an article some years back about research into accuracy versus barrel length with .22 rimfire. The results were astounding, as the accuracy was at its optimum with a barrel length somewhere under six inches if I remember correctly, and a minimum or no improvement was achieved by having the barrel any longer. This of course was from a Ransom rest, and didn't take into consideration balance points, recoil etc. My experience is that the longer barrel provides better balance, and the longer sight radius illustrates our natural movement more clearly. With practice, and more experience in the free pistol event, I am sure the longer barrel coupled with a perfectly fitting orthopaedic grip, and a light crisp trigger wil be the best combination
I am also sure that free pistol manufacturers have experimented with every possible length, and all have arrived at a similar measurement for a very good reason.
User avatar
Fred Mannis
Posts: 1298
Joined: Sun Aug 29, 2004 8:37 pm
Location: Delaware

Post by Fred Mannis »

zoned wrote:Can anyone recommend a gunsmith who could do a proper job of cutting and crowning the barrel on a Free Pistol?
Dave Sams (Sams Custom Gun Works) has done two free pistols that I am aware of. Ransom Rest testing of the guns showed that with the proper ammo they were still capable of 0.5" 10 shot groups at 50 yds.
JamesH
Posts: 792
Joined: Tue Mar 25, 2008 4:26 am
Location: Australia

Free Pistol

Post by JamesH »

Is it just perceived wobble due to the sight radius?
Just move the foresight back, no need to touch the barrel.
I'm guessing you could make some sort of mount which would clamp on the barrel say half way along.
Brian James
Posts: 357
Joined: Sat Feb 05, 2005 11:59 pm
Location: Ottawa, Canada

Post by Brian James »

The barrel Mark Briggs speaks of in his post is mine. Like Mark, I enjoyed the different balance and the shorter sight radius. The custom barrel produces groups equal or better than the test target provided with the gun. My general impression is the gun is more forgiving now, than it used to be.

A local gunsmith produced custom barrel and I can put you in touch with him,

Brian
shadow
Posts: 358
Joined: Tue Nov 15, 2005 7:56 pm

Free Pistol

Post by shadow »

I am a woman and I shoot a Morini 84E. I bought it used from our host. When I received it I moved the "sight base" all the way back, flush with the end of the barrel. I have a shorter sight radius and - in my opinion - the balance is perfect. I do not have any problem with "losing the front sight" and/or low shots. Better yet, it did not cost any money and I have not altered the pistol in any way.

Susan
Post Reply