Scuba Tank Adapter

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
jimsoars
Posts: 53
Joined: Thu Dec 06, 2007 6:45 pm
Location: Broomfield Colorado USA
Contact:
Contact jimsoars

Scuba Tank Adapter

Post by jimsoars »

I just bought an FWB P34 and I found a reasonable scuba tank at my local dive shop. The problem is that I must need some kind of adapter on the tank to put the cylinder adapter on. Can someone point me where to get such an adapter.

PS - I don't see any screw thread type things on the tank.
Thanks - Jim
Top
User avatar
Richard H
Posts: 2654
Joined: Mon Mar 01, 2004 11:55 am
Location: Guelph, Ontario
Contact:
Contact Richard H

Post by Richard H »

What did the tank come with? Depending what it has you can get a 200 bar k-valve, or you can get a Din Valve installed. Best bet is to take you fill adapter and you tank to a dive shop and see what you need.
Top
jimsoars
Posts: 53
Joined: Thu Dec 06, 2007 6:45 pm
Location: Broomfield Colorado USA
Contact:
Contact jimsoars

Post by jimsoars »

This is what is on the tank.
Thanks - Jim
Attachments
TankValve.JPG
Top
User avatar
Gort
Posts: 237
Joined: Sat Jan 21, 2006 10:07 am
Location: Michigan, USA

Post by Gort »

Jim, You need a K valve as pictured in our hosts site.
Gort
Attachments
scubayoke1.jpg
scubayoke1.jpg (7.08 KiB) Viewed 1125 times
Top
Post Reply

Return to “Olympic Pistol”