Relative lead contamination levels

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Bruce Martindale
Posts: 93
Joined: Tue Mar 16, 2004 10:46 pm

Post by Bruce Martindale »

Hi All, There are 2 sources of lead; the primer in ctg guns and the trap (all guns)

For AP at home I shoot into duct seal in an enclosed box (idea here from Joe Matusyk (SP?) so there is no lead dust in the trap area (biggest source in AP)

There may by minor airborn lead at the firing point from bbl abrasion. I see some lead coating in my Morini AP compensator. but again this can be wet wiped from the floor assuming no carpets.

I wouldnt use ctg guns in a home.

regards
Guest

Post by Guest »

here is some good info for pellet usage
http://www.vogelusa.com/fact1_lead.pdf
Post Reply