Electronic 22 Standard Pistols
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
- JulianY
- Posts: 350
- Joined: Fri Oct 13, 2006 6:26 am
- Location: A british shooting refugee in Amsterdam
- Contact:
Electronic 22 Standard Pistols
Are the SP1 and the MG2 the only electronic trigger standard pistols available or are the any others out there worthy of serious consideration ?
JY
JY
Unfortunately the Morini FP & AP are the only ones with "good" electronics. The SPE and Matchguns have rather suspect electronics as of yet, when you do not see European teams outfitted with a particular gun, that's usually the first clue as to a guns viability. The MG-1 E would never be on my shopping list---(personal bad experiences with MG1). Everything moderates in time, with enough complaints in their in baskets most manufacturers see the handwriting on the wall. Not so with Morini, (excuse me Matchguns) they usually need a bat (cricket or baseball will do)aside their heads to get their attention first. I had an experience with Pardini's previous venture into electronics with the Schumann RF gun---thanks to Don Nygord there was a never ending supply of modules available---a continuous line from here to Arizona---to Italy----and back. I am still old fashioned give me levers and springs and crazy adjustments, I get a good trigger pull.
-
- Posts: 5617
- Joined: Mon Mar 01, 2004 12:49 pm
- Location: Ruislip, UK
Re: Electronic 22 Standard Pistols
I think they are the only 2 in current production.JulianY wrote:Are the SP1 and the MG2 the only electronic trigger standard pistols available or are the any others out there worthy of serious consideration ?
The early SP1s had a few electronics problems but I think they have been sorted for about 18 months now.
Not sure if the MG2 is now trouble free. There certainly don't seem to be as many complaints as there were a few months ago.
As with most modern guns, a major factor in your purchasing decision should be the local availability of spares and support.
That old Morini was the 102E, and it's the only one where I would bet 10 bucks against a warm beer on the trigger... but not on the rest of the gun. Despite that, there are some specimens known to be working, and then the 102E is second to none. If Francesco had some punch, he would go ahead and get that thing running instead of playing around with the CM22.
For your info, my Pardini SP1 electronic works perfectly fine. I have owned it for about 4 months. So I guess Pardini have have worked out the bugs by now. Btw, trigger module is 760 M
Trigger feel is excellent, on par with Morini 162E AP (which I also own). I have had no problems with battery drainage or accidental double shots that I have been reading about here.
Cheers,
Axel
Trigger feel is excellent, on par with Morini 162E AP (which I also own). I have had no problems with battery drainage or accidental double shots that I have been reading about here.
Cheers,
Axel
Not to put too fine a point on it: I believe there are NO electronic triggers on any standard pistol or any air pistol either. A battery, a relay and a switch connected to the trigger comprise an electric not an electronic device. Why do engineers and our other nitpickers tolerate this ongoing mis-usage?
-
- Posts: 583
- Joined: Mon Mar 01, 2004 8:35 am
- Location: The Frigid North - Ottawa, Canada
William,
Don't want to pick too many nits here, but the term "electronic trigger" is indeed a valid term. If you have an opportunity to look at the innards of a Morini or Pardini (or even a Matchguns or Walther for that matter) that's equipped with an electronic trigger you'll find there's much more to it than just a switch and a relay (or more properly, a solenoid). You'll find a multi-layer PWB populated with capacitors, resistors, integrated circuits, FETS, diodes, LED's and opto-receptors and maybe even a few other interesting tidbits.
Yup, these things really are electronic. If you don't believe me, just take out the "electronic module" and leave the switch and solenoid in place, then see if you can make the unit fire. After trying this a few times I think you'll agree that electronics really are what make these babies work! ;-)
Don't want to pick too many nits here, but the term "electronic trigger" is indeed a valid term. If you have an opportunity to look at the innards of a Morini or Pardini (or even a Matchguns or Walther for that matter) that's equipped with an electronic trigger you'll find there's much more to it than just a switch and a relay (or more properly, a solenoid). You'll find a multi-layer PWB populated with capacitors, resistors, integrated circuits, FETS, diodes, LED's and opto-receptors and maybe even a few other interesting tidbits.
Yup, these things really are electronic. If you don't believe me, just take out the "electronic module" and leave the switch and solenoid in place, then see if you can make the unit fire. After trying this a few times I think you'll agree that electronics really are what make these babies work! ;-)
- JulianY
- Posts: 350
- Joined: Fri Oct 13, 2006 6:26 am
- Location: A british shooting refugee in Amsterdam
- Contact:
What about the 103 trigger in the cm22 to make something to compete with the Sp1Tycho wrote:That old Morini was the 102E, and it's the only one where I would bet 10 bucks against a warm beer on the trigger... but not on the rest of the gun. Despite that, there are some specimens known to be working, and then the 102E is second to none. If Francesco had some punch, he would go ahead and get that thing running instead of playing around with the CM22.
JY