Over-haul for Steyr LP1

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
wai
Posts: 34
Joined: Fri Mar 19, 2004 8:00 am
Location: Singapore

Over-haul for Steyr LP1

Post by wai »

I have been shooting my LP1 for about 3 years now, are there any parts that are due for replacement ?

I will be replacing some screws that are worn out, but does the O-rings / springs / Trigger sear need to be replaced ?
Top
Guest

Post by Guest »

might be a good idea to get them checked too leaks can be really bad.
Top
User avatar
RobStubbs
Posts: 3183
Joined: Mon Mar 01, 2004 1:06 pm
Location: Herts, England, UK

Re: Over-haul for Steyr LP1

Post by RobStubbs »

wai wrote:I have been shooting my LP1 for about 3 years now, are there any parts that are due for replacement ?

I will be replacing some screws that are worn out, but does the O-rings / springs / Trigger sear need to be replaced ?
I tend to leave things alone unless they show signs or problems ocurr. The only exception would be things like the o ring seals that you can see. If they look worn then replace them. If the gun is old and hasn't been serviced then I would consider getting it serviced by a guns smith. I did exactly that with my 5 year old LP10, but it was slowly losing power.

Rob.
Top
Post Reply

Return to “Olympic Pistol”