Walther- Hammerli link

Reinhamre · Post by **Reinhamre** » Fri May 19, 2006 1:25 pm

Hi,

So the Walther does care for Hammeri owners. This is more than Hammerli had on there site.

But why is this site hidden? I have found it though, and like to share it with you.

Kent

http://www.carl-walther.de/deutsch/aktu ... ngen.shtml

BJ · Post by BJ » Fri May 19, 2006 4:59 pm

Interesting to note that Hammerli give a life of 20 years on their Air cylinders.

catmdude · Post by **catmdude** » Fri May 19, 2006 10:29 pm

Here's the english link
http://www.carl-walther.de/englisch/spo ... sport.html

David Levene · Post by **David Levene** » Sat May 20, 2006 1:52 am

catmdude wrote:Here's the english link
http://www.carl-walther.de/englisch/spo ... sport.html

I'm afraid it isn't the same at all.

The link that Kent gave was to the Hammerli items on the Walther site.

PaulT · Post by **PaulT** » Sat May 20, 2006 4:49 am

This is interesting, I have written to Hammerli and now Walther with a polite letter asking what warrantee support, if any, will they provide for broken SP20 frames (x2) and an SP20 slide (x2). We have had to purchase replacement frames and slides from dealers as the factory did not acknowledge our communications nor requests for warrantee replacements.

Communications were in a time of transition but as I have posted previously, the SP20 pistols were regularly serviced and given that we can only shoot a few days a year, their duty in operation has been very low.

If anybody from Hammerli or Walter is patrolling this forum, we would be delighted to hear from you!

Reinhamre · Post by **Reinhamre** » Sun May 21, 2006 3:40 am

Hi,

Have you noticed that Hammerli FP10 is NOT on the list?
Is it an orphan now?

I have sold my FP10 and bought a FP60, good timing.

Kent

Post by **pilkguns** » Sun May 21, 2006 6:59 am

the pdf files are also available on the 10P files
http://www.pilkguns.com/tenp/hami.htm

Lee Jr · Post by **Lee Jr** » Mon May 22, 2006 11:54 am

The link does not appear to be on the "englisch" version website, but all the manuals I checked included english translations. In addition to the FP10, I noticed they are missing the 160 Special. Was it sold with instructions for the 160, or did they do up new instructions for it?

Lee

Guest · Post by **Guest** » Mon May 22, 2006 1:53 pm

Go to the bottom of the document and you'll find the english version