I just bought myself secondhand anschutz lp@ airpistol.
Near the top of the breech/receiver there are two hole which air is out when I shoot the pistol, is this normal ?
what is the fps if all the seals not leaking air ?
just to make me more confidence with the pistol.
thanks in advance
Anschutz LP@ newbie question
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
There shouldn't be ANY leakage of air from those two holes, or indeed from the breech area. If air is definitely escaping from one of the holes, the grubscrew is missing. A good engineer's supply shop should be able to sell you a replacement. If air is escaping from the breech, the 'o'-ring inside the sliding breech and/or the transfer port 'o'-ring (the bigger one you can see when the breech is open) need renewal. Contact our sponsor Pilkguns - they should be able to help you.
I chronied my LP@ at my local pistol club, and got an average of around 520fps with Gamo Match pellets (7.5gr), in warm temperatures. I've had mine now for 6 months, and together we just took a silver medal at the South Pacific Masters Games! These are superb airpistols!
I chronied my LP@ at my local pistol club, and got an average of around 520fps with Gamo Match pellets (7.5gr), in warm temperatures. I've had mine now for 6 months, and together we just took a silver medal at the South Pacific Masters Games! These are superb airpistols!