A Corrective Lens

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Matt
Posts: 127
Joined: Mon Mar 29, 2004 10:54 pm
Location: Essexville, Michigan USA
Contact:

A Corrective Lens

Post by Matt »

I would like to know (from the very experienced air pistol shooters) what corrective power do you make your lens to enable a clear sight picture. By this I mean what is the correction between your 'street lens' and your 'shooting lens'.
Roly
Posts: 32
Joined: Mon Mar 01, 2004 1:20 pm
Location: New Hampshire, USA

Post by Roly »

Hi Matt. The short and best answer is whatever works for YOU. Go see your optometrist. Mine lets me bring my gun into the exam room and fits me with a lens which gives me the "perfect" sight picture.
That being said I still use a diopter over the lens which allows me to accomadate the greatly varying sources and intensities of lighting which exist at various ranges.
I think your question is very well intentioned but it is a lot like the "Which is the best gun/pellet/propellent?" type of question. There is no simple answer.
User avatar
RobStubbs
Posts: 3183
Joined: Mon Mar 01, 2004 1:06 pm
Location: Herts, England, UK

Post by RobStubbs »

I have just had a lens made for me be a specialist shooting optician. Mine is 0.75 correction although I've heard 0.25 - 0.5 is standard. Apparenetly I'm slightly long sighted anyway. The best thing though is to see an optician with your gun (make sure you agree it with them though) and see what works best.

Rob.
Alex
Posts: 51
Joined: Thu Jun 03, 2004 7:43 pm
Location: NE PA

A question about corrective lens

Post by Alex »

If y
ou haven't already, read "The Eyes Have It." in Nygord's Notes(www.nygordprecision.com). Part of a great shooter's legacy. Thanks Don.

Hold center,

Alex
Mac
Posts: 5
Joined: Mon Mar 01, 2004 1:28 pm
Location: Flint, Michigan, USA

Post by Mac »

My OD has crafted a pair of glasses such that the focus is somewhat past
the front sight. The target is not sharp, but the front sight is. At the bottom of the glasses is a small section with a close focus so that
I am able to read a program or the like. Works very well.

Having the target be out of focus is an advantage. It helps one to keep
focus on the front sight! Mac Michigan
Mac; Michigan, USA
F. Paul in Denver

Post by F. Paul in Denver »

Roly,

I just received a set of four power lenses which are also designed for over the lens use on my Champion frames. The lenses, which range from .25 to 1.0 magnification, just snap right on to the existing prescription lens.

My problem though is that once installed they fuzz up the front site. On the hand, if I just hold the power lens in my hand without attaching it and move it away from the prescription lens about 3/4 to one inch, the magnified sight picture clears up nicely .

My question to you is - how does your power lens attach to your frames? Does it attach right over the prescription lens or is there some space between the two lenses??

Thanks
guest

Post by guest »

might want to be careful, issf rules you can only use one lens at a time
aurorapolice02_11
Posts: 103
Joined: Mon Mar 15, 2004 7:33 am
Location: Denver, CO

It may be...

Post by aurorapolice02_11 »

Paul,

I think what happens when you put one lens over another, it tends to allow for reflections to "bounce" around between the two lenses. If you could find an anti reflective coating it may help, but I don't know how easy that will be without having it professionaly done.

As far as the other post...what ISSF does not allow for lens use like this?

Mike Douglass
R.M.
Posts: 156
Joined: Mon Mar 01, 2004 8:35 am
Location: On top of a mountain west of Golden Colorado

Post by R.M. »

We've had this discussion before about the "More than one lens rule", and nobody can quote a rule number to verify that it's more than urban legend. It is possible that it used to be a rule, but isn't now.
Come on people, let's dig out your rule books and find this rule.

R.M.
David Levene
Posts: 5617
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Post by David Levene »

R.M. wrote:Come on people, let's dig out your rule books and find this rule.
....or alternatively you could spend your time doing something productive ;-)

There is no rule that I know of to stop you having a lens, or system of lenses, on shooting glasses, at least for the aiming eye. Whether any particular setup for the non-aiming eye could be classed as a blinder is another matter.
User avatar
RobStubbs
Posts: 3183
Joined: Mon Mar 01, 2004 1:06 pm
Location: Herts, England, UK

Post by RobStubbs »

F. Paul in Denver wrote:Roly,

I just received a set of four power lenses which are also designed for over the lens use on my Champion frames. The lenses, which range from .25 to 1.0 magnification, just snap right on to the existing prescription lens.

My problem though is that once installed they fuzz up the front site. On the hand, if I just hold the power lens in my hand without attaching it and move it away from the prescription lens about 3/4 to one inch, the magnified sight picture clears up nicely .

My question to you is - how does your power lens attach to your frames? Does it attach right over the prescription lens or is there some space between the two lenses??

Thanks
I would suggest you would be far better to get a specific lens made up for your shooting glasses. As you say with two lenses they will interact with each other and you will get problems with relection / refraction. And by the sounds of it you never get a clear foresight picture which is the whole point of a lens.

Rob.
R.M.
Posts: 156
Joined: Mon Mar 01, 2004 8:35 am
Location: On top of a mountain west of Golden Colorado

Shooting Lenses

Post by R.M. »

You should also be aware that all lenses are not created equal.
Recently I went to see my optometrist, who I feel is very good and understands what I need. I have 2 pair of shooting glasses, and ordered a new aiming eye lens for both pair. When got them, one was OK, but the other was unusable. The rear sight looked OK but the front was blurry. I took them back and they checked the prescription, and they were both the same, the difference was that the one lens's focal center was offset a bit. This was enough to make the lens junk.
Moral of the story, ask for zero tolerance when they grind the lens. It doesn't take much of an error to make a lens useless.

R.M.
User avatar
Fred Mannis
Posts: 1298
Joined: Sun Aug 29, 2004 8:37 pm
Location: Delaware

Re: Shooting Lenses

Post by Fred Mannis »

R.M. wrote:Moral of the story, ask for zero tolerance when they grind the lens. It doesn't take much of an error to make a lens useless.
R.M.
Interesting story. Norman Wong, an Optometrist and bullseye shooter has discussed this and many related issues on bulleye-L. He makes the point in one post that many labs do not fill a lens prescription exactly +/-0.125 diopter being acceptable and +/-0.25 not unusual. He says that the shooter must have his optometrist carefully measure the lens parameters before accepting the lens from the lab.
His 'Bullseye Shooters Guide for the Eyecare Professional' is a easy way to help a non shooting eye docter understand our needs.
F. Paul in Denver

Post by F. Paul in Denver »

Unfortunately, I bought the lenses BEFORE I read the venerable Dr. Wong's terrific treatise on the eyecare needs of shooters.
Guest

Post by Guest »

Check this out.....from airgunsonly.com .....

OUR SELF-TESTING KIT
This kit will help you to select the best corrective lens which will be made to fit your Knobloch shooting glasses.

The kit contains a complete set of Knobloch glasses with a special lens holder that takes any combination of three lenses. It allows you to quickly change the power of the lens to determine exactly what lens correction you require. You can select the lens that allows you to see the very best sight picture. You can do this right on your own range under the correct lighting conditions and at the exact distance from the target. You can select from over forty different lenses and you get a preview of exactly what you are going to see when you finally order the lens to be made. No guess work....what you see is what you will get. Write or call us on how to select the best lens for your particular needs. We don’t care how many use the kit .... and the whole club can try it out. See the technical article on our "Technical Tips" page.
US $ CAN $
Self-testing kit rents per week at: you pay the post both ways.
$20.00 $25.00
guest

re; knobloch test kit

Post by guest »

how can I contact you to order lenses. I already know which lenses I need, Im dont need to use the test kit.
Ted
tchmielewski@hotmail.com
Post Reply