steyr adapter

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
forage

steyr adapter

Post by forage »

I was just wondering if the Steyr LP10 required a special adapter for filling from an air tank?

Thanks.
Bill Poole
Posts: 435
Joined: Mon Mar 01, 2004 10:50 pm
Location: Scottsdale, AZ
Contact:

Post by Bill Poole »

The picture on http://www.pilkguns.com/lp10.htm sure looks like it comes with an adapter, I'll know for sure in a coupla days :)

the adapter screws into the "yoke"

http://www.pilkguns.com/yoke.htm

there is some good info on
http://www.pilkguns.com/scuba.htm



good shooting...

Poole
http://arizona.rifleshooting.com/
David Levene
Posts: 5617
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Post by David Levene »

I am sure that all pistols from the top manufacturers will come with the appropriate DIN filling adaptor, normally the 232 bar version (although some air rifles may come with the 300 bar version).

When specifying the adaptor or valve for the tank ensure that it is the correct DIN version. A 300 bar gun filling adaptor will work in a 232 bar tank adaptor, but not vice versa.
Neil Foster
Posts: 107
Joined: Sun Oct 31, 2004 1:57 pm
Location: Marietta, GA

Steyr Fitting

Post by Neil Foster »

It does come with the 200 bar adapter that will screw into a DIN yoke. I just got one from Scott Pilkington, and it is a nifty piece of equipment.
Neil
forage

Post by forage »

Thanks everyone for the info.
Post Reply