IZH-35M recoil spring

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

Post Reply
Higham
Posts: 5
Joined: Wed Jan 10, 2024 10:56 pm

IZH-35M recoil spring

Post by Higham »

Does anyone know of a substitute spring I can use to replace a recoil spring on an IZH-35M? Or where to find a new one? Thanks in advance.
dubbyah
Posts: 2
Joined: Sat Jan 27, 2024 5:12 pm

Re: IZH-35M recoil spring

Post by dubbyah »

You might try asking on bullseyeforum.net also
dubbyah
Posts: 2
Joined: Sat Jan 27, 2024 5:12 pm

Re: IZH-35M recoil spring

Post by dubbyah »

Another thought, a recoil spring for an AW93 might work.
Higham
Posts: 5
Joined: Wed Jan 10, 2024 10:56 pm

Re: IZH-35M recoil spring

Post by Higham »

Thank you both for your input.
Shiloh
Posts: 92
Joined: Tue Dec 29, 2015 3:46 pm
Location: Northern Virginia

Re: IZH-35M recoil spring

Post by Shiloh »

IF the AW93 spring would work, it would be the earlier model spring - before serial number 20000.

I don't think the later model spring (after serial number 20000) comes separately but is rather fixed to the rod. Best to check with Pilkguns to see if they have them and if the early model spring will work.

I asked a few years ago about the later model and they didn't carry in stock.
User avatar
Sa-tevo
Posts: 220
Joined: Sat Mar 09, 2013 8:04 pm
Location: Georgia, USA

Re: IZH-35M recoil spring

Post by Sa-tevo »

How many coils, the spring outside diameter and what is the wire thickness would be good info for people looking to see what might match up.
Higham
Posts: 5
Joined: Wed Jan 10, 2024 10:56 pm

Re: IZH-35M recoil spring

Post by Higham »

Sa-tevo, wire diameter is .60mm, length 136mm, spring OD 4.70mm, spring ID 3.35mm, and 5 turns in 10mm. That's the best I can come up with.

I have looked around and came up with zero...

Shiloh- I will contact Pilk.
fc60
Posts: 749
Joined: Fri Nov 25, 2005 11:46 am
Location: Western Washington State, USA 98385

Re: IZH-35M recoil spring

Post by fc60 »

Greetings,

Based on memory, the Walther KSP200 was a copy of the IZH-35M.

https://carl-walther.com/uploads/media/ ... 7206_c.pdf

Some parts are still available from Germany.

https://schiesssport-billharz.eu/KSP

https://schiesssport-billharz.eu/2644207-Vorholfeder

Judith is nice to deal with. Bear in mind, shipping is via DHL ($$$$).

With the part number, 2644207, you might be able to source on from Champion Choice or Earl's Walther.

Cheers,

Dave
User avatar
Sa-tevo
Posts: 220
Joined: Sat Mar 09, 2013 8:04 pm
Location: Georgia, USA

Re: IZH-35M recoil spring

Post by Sa-tevo »

fc60/Dave,

Good reply. I was coming from the opposite direction. Horses versus zebras when one sees a hoof print.
Higham
Posts: 5
Joined: Wed Jan 10, 2024 10:56 pm

Re: IZH-35M recoil spring

Post by Higham »

fc60 good info. I will start with that.

I gave the measurements to wollf springs and they are no help.
BobGee
Posts: 588
Joined: Fri Oct 01, 2010 6:43 am
Location: Sydney, Australia

Re: IZH-35M recoil spring

Post by BobGee »

fc60 wrote: Fri Mar 22, 2024 7:19 pm
https://schiesssport-billharz.eu/2644207-Vorholfeder

Judith is nice to deal with. Bear in mind, shipping is via DHL ($$$$).

With the part number, 2644207, you might be able to source on from Champion Choice or Earl's Walther.

Cheers,

Dave
DHL to Australia: €60! For a €10 piece which weighs in at (say) 50gm and fits in a standard Jiffy bag. Sheesh!

Bob
Post Reply