Noticed these marks from where the hammer is hitting the slide.. Anyone else get these?
Do I need to sand the corners down on the hammer?
- 06a080fa8b4986ca45824a6b67b57760e2069978_2_419x500.jpeg (33.09 KiB) Viewed 7167 times
hammer hitting the slide
Moderators: pilkguns, m1963, Isabel1130
hammer hitting the slide
Recently bought a Pardini Gt9 6" in very good condition.
Noticed these marks from where the hammer is hitting the slide.. Anyone else get these?
Do I need to sand the corners down on the hammer?
Noticed these marks from where the hammer is hitting the slide.. Anyone else get these?
Do I need to sand the corners down on the hammer?
Re: hammer hitting the slide
My bad, on first inspection of the photo, I saw the marks on the firing pin stop and thought thats what you were talking about. When I revisited the photo, I saw the marks you are referring to, It is not normal.
Gort
Gort
Last edited by Gort on Sun Mar 10, 2024 8:08 am, edited 1 time in total.
Re: hammer hitting the slide
In the top two corners?
I'm not familiar with GT9s but seems a bit odd.
I'm not familiar with GT9s but seems a bit odd.