Good morning!
I was practice 10meter in the morning and a Pellet entêtés in the opposite way... I give some small beatings on the P44 and when I went to shoot she wouldn't shoot!
The trigger was stuck, it couldn't go from dry shot to air... I tried to activate the cocking and nothing, it didn't reach the end and suddenly fired two shots with out touch the trigger…
I went to see from the absorber to the manual and turned to the right screw because was before the 3mm!
It is good! Was it really a from the absorber?
It seems that it was good and that you rotate to the right is when the resistence is before 3mm which was the case... it seems that running only on little bit to the right and giving a few shots straigth as the manual says it was good!!!
Was it the absorber?
Feinwerkbau P44-Doesnt shot or cock the lever!!!is the absorber?
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
10metershooterazores
- Posts: 85
- Joined: Sat Dec 03, 2022 5:47 pm
Feinwerkbau P44-Doesnt shot or cock the lever!!!is the absorber?
10 meter Shooter