Feinwerkbau P44 Absorber question

[10metershooterazores]

Hello!
I have a FWV P44 since Christmas but it was from my brother and he offers me, because im in P10 meters Sport Shooting ISSF about one year and a month or two, and i had the FWB 103!
With the P44 my high score was made today with 516 points, with 103 was 492!
My question is how to know if the absorber is working like is should, how does it work and if is not working like it should how do i know and what should i do?
In my opinion the pistol is perfect but how the P8X have a red plastic piece to transport the pistol because of the absorber, the question came in my mind…
Thank you in advance!
Good shoting

[BobGee]

The manual, pages 24-26 describe the action of the absorber and how to determine if it is properly adjusted. If you do not feel the resistance after firing the pistol in a horizontal direction and slowly opening the cocking lever, or the resistance point is outside the limits, it needs fixing in the case if the former or adjusting in the case of the latter. Pages attached.

P44 manual p 24-26.pdf

(205.8 KiB) Downloaded 83 times

Bob

[10metershooterazores]

The manual, pages 24-26 describe the action of the absorber and how to determine if it is properly adjusted. If you do not feel the resistance after firing the pistol in a horizontal direction and slowly opening the cocking lever, or the resistance point is outside the limits, it needs fixing in the case if the former or adjusting in the case of the latter. Pages attached.

P44 manual p 24-26.pdf

Bob

Thank you, i think mine is fine!

[BobGee]

10metershooterazores, do you need the rest of the manual?

Bob

[10metershooterazores]

10metershooterazores, do you need the rest of the manual?

Bob

No, thank you, i have on bookmarks on a webpage!
But thank you very much

[10metershooterazores]

10metershooterazores, do you need the rest of the manual?

Bob

But I have a question if you don't mind:
today, I screwed the cylinder with little air (110 bar+-) in the gun and started to spill air! Well... yesterday she took white gresse in the cocking lever and inside (where possible) and today during the night she had a fall inside the case.
Well... I cleaned the regulating valve and cylinder and it continued, but it seemed to be from the gun and not from the cylinder...I shot it without a pellet and put it in dry fire...it stopped and never did it again!
A friend of mine who understand a litle about FWB pistols and has a P44 says it could be something "glued/stucked” that detached with the shot.
What do you think?
Thank you

[BobGee]

I'm afraid I cannot offer a reason. I think your friend is probably right.

Bob

[10metershooterazores]

I'm afraid I cannot offer a reason. I think your friend is probably right.

Bob

Thank you!
Do you know why is the reason sigths can inclinate to rigth and left(not the shot, the sigth) has show in the picture?

[BobGee]

Some shooters like to cant/tilt their pistol a small amount. Usually to the left for a right-hander. The rear and front sights can be rotated back to the vertical plane to compensate for this cant.

Bob

[10metershooterazores]

Some shooters like to cant/tilt their pistol a small amount. Usually to the left for a right-hander. The rear and front sights can be rotated back to the vertical plane to compensate for this cant.

Bob

Thank you for you help!
Goods shots