I would like to know if it is normal to loss air in my Morine cylinder if left for a period of 6-7 weeks? lost all the air in one cylinder. is there something i can do to help this problem. everything is new. (6 mons old)
papa85-at-comcast.net.49441.0
air loss in cylinder
Moderators: rexifelis, pilkguns
-
Len
Re: air loss in cylinder
If it's a cylinder off the gun, there isn't much you can do at home unless you are used to working with HPA and are experienced in it.
You may want to check to see if it has dirt in the end, but if it's any of the internal portions of the cylinder someone else has to replace that.
A good trick is to fill it, and then submerse it in water to check where the leak is.
Other methods include rubbing soapy water on the body to see if there is a detectable leak.
If it's on the gun, sometimes o-rings/seals fail or there is a minor problem in the action.
As it is new, I would just send it in to get fixed.
.49442.49441
You may want to check to see if it has dirt in the end, but if it's any of the internal portions of the cylinder someone else has to replace that.
A good trick is to fill it, and then submerse it in water to check where the leak is.
Other methods include rubbing soapy water on the body to see if there is a detectable leak.
If it's on the gun, sometimes o-rings/seals fail or there is a minor problem in the action.
As it is new, I would just send it in to get fixed.
.49442.49441