Thanks!
.49082.0
Is anyone expert at the trigger adjustments on a Unique 32U?
Moderators: rexifelis, pilkguns
-
JLK
David, I would like to put as much "roll" in as possible but
that I don't quit understand the instructions.
Thanks!
.49118.49113
Thanks!
.49118.49113
-
David M
Roll off
To give the trigger roll off you need to increase the second stage travel.
Now the Unique trigger as factory set the second stage travel and weight is the double concentric screw in front of the trigger.
The inner screw is the weight and the outer adjusts the contact point for the second stage trigger point.
Once you reset the travel you will need to reset the sear travel so the engage position of the transfer bar engages at the same time as the second stage point (otherwise you will end up with a three stage trigger). It is not difficult but just time consuming to get the feel right.
.49174.49118
Now the Unique trigger as factory set the second stage travel and weight is the double concentric screw in front of the trigger.
The inner screw is the weight and the outer adjusts the contact point for the second stage trigger point.
Once you reset the travel you will need to reset the sear travel so the engage position of the transfer bar engages at the same time as the second stage point (otherwise you will end up with a three stage trigger). It is not difficult but just time consuming to get the feel right.
.49174.49118
-
JLK
Thanks!
: To give the trigger roll off you need to increase the second stage travel.
: Now the Unique trigger as factory set the second stage travel and weight is the double concentric screw in front of the trigger.
: The inner screw is the weight and the outer adjusts the contact point for the second stage trigger point.
: Once you reset the travel you will need to reset the sear travel so the engage position of the transfer bar engages at the same time as the second stage point (otherwise you will end up with a three stage trigger). It is not difficult but just time consuming to get the feel right.
.49211.49174
: Now the Unique trigger as factory set the second stage travel and weight is the double concentric screw in front of the trigger.
: The inner screw is the weight and the outer adjusts the contact point for the second stage trigger point.
: Once you reset the travel you will need to reset the sear travel so the engage position of the transfer bar engages at the same time as the second stage point (otherwise you will end up with a three stage trigger). It is not difficult but just time consuming to get the feel right.
.49211.49174