Need Izh-46M Trigger Info
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Need Izh-46M Trigger Info
I need some help from someone with an Izh-46M and a set of calipers. Would you please measure the dimensions of the track that the trigger slides on? I need to know the width and height of the track.
-
brent375hh
- Posts: 741
- Joined: Wed Apr 17, 2013 8:04 am
- Location: Minneapolis
Re: Need Izh-46M Trigger Info
I have both items. I can tell you the width is .135". The height is not possible for me to measure, nor the angle. Sorry, it sits too low in the recess to measure.
Re: Need Izh-46M Trigger Info
Shot in the dark: is it possible to slide the loosened trigger blade off the track and measure the opening in the top of the blade?
Bob
Bob
Re: Need Izh-46M Trigger Info
Track is not circular.
It is triangular with the top cut flat.
It is triangular with the top cut flat.
Re: Need Izh-46M Trigger Info
Top width is 2.5mm on my caliper.
Bottom width is 4mm.
Bottom to top is about 1mm.
Those are measure of trigger triangular track slot
Bottom width is 4mm.
Bottom to top is about 1mm.
Those are measure of trigger triangular track slot
Re: Need Izh-46M Trigger Info
Thank you all!
-
brent375hh
- Posts: 741
- Joined: Wed Apr 17, 2013 8:04 am
- Location: Minneapolis
Re: Need Izh-46M Trigger Info
I did as Bobgee mentioned.
I get .115 inches at top, .145 inches at bottom.
I get .115 inches at top, .145 inches at bottom.
- Attachments
-
- Here is my caliper opened to .115 for scale.
- IMG_20221121_232114912~2.jpg (54.25 KiB) Viewed 3416 times