walther LP500 windage adjustment

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
emre-nur
Posts: 193
Joined: Wed May 26, 2021 3:31 pm

walther LP500 windage adjustment

Post by emre-nur »

Hi everyone,

My pistol seems to shoot to the left.
Looking to the manual it says: "correction to the left, turn the screw to counterclockwise"
Is this my option or will it shift my shots further to the left?
Thanks.
40xguy
Posts: 221
Joined: Thu Jan 21, 2016 1:25 pm
Location: Ohio. USA

Re: walther LP500 windage adjustment

Post by 40xguy »

turn the screw and see what happens. if you like what results, then you turned it the correct way. if you don't like the results, turn the screw the other way.. five shots ought to tell you what you need to know.
Hammer to shape, file to fit, paint to match...
emre-nur
Posts: 193
Joined: Wed May 26, 2021 3:31 pm

Re: walther LP500 windage adjustment

Post by emre-nur »

40xguy wrote: Fri Jul 08, 2022 12:18 pm turn the screw and see what happens. if you like what results, then you turned it the correct way. if you don't like the results, turn the screw the other way.. five shots ought to tell you what you need to know.
I fluctuate a lot in between the shots. Could be costly :)
McMadCow
Posts: 174
Joined: Sun Aug 03, 2014 4:46 pm
Location: SF Bay Area

Re: walther LP500 windage adjustment

Post by McMadCow »

The instructions on the sight itself tell you how to use them. The little diagram shows the hit to the right of the bullseye and the direction to turn to fix it. In the case your shot is going the other way, do the opposite.
RodJ
Posts: 56
Joined: Sat Jun 26, 2021 4:08 pm

Re: walther LP500 windage adjustment

Post by RodJ »

Watch the rear sight movement as you turn the screw / adjustment. If the rear sight moves to the RIGHT then it will move the bullet impact to the right.

If each click of adjustment is so small as to be hard to see the movement of the rear sight, start counting clicks until it’s obvious which way that sight is moving. Then turn back the same number of clicks and start your adjustment.

Hope that helps.
David M
Posts: 1676
Joined: Wed Mar 24, 2004 6:43 pm

Re: walther LP500 windage adjustment

Post by David M »

Most German sights are marked as "Shot Calling", move the sight to move the dot "shot" to centre.
Sight.jpg
Sight.jpg (36.76 KiB) Viewed 17714 times
ie. if your shot is to the right of target (shown as dot to the right on rear sight), rotate sight screw clockwise (direction of arrow). Shot moves about one pellet diameter per click.
robjob
Posts: 155
Joined: Thu Dec 11, 2014 5:23 pm

Re: walther LP500 windage adjustment

Post by robjob »

David M wrote: Fri Jul 08, 2022 1:50 pm Shot moves about one pellet diameter per click.
Page 66 of the manual says 0.8mm (0.031") per click. 5.7 clicks per pellet diameter
User avatar
Ramon OP
Posts: 334
Joined: Fri Feb 09, 2018 7:12 am
Location: Brussels, Belgium
Contact:

Re: walther LP500 windage adjustment

Post by Ramon OP »

List of pistol sightment adjustments with explanations on how to do them for each pistol https://www.olympicpistol.com/universal ... heatsheet/
KH250
Posts: 81
Joined: Fri Nov 10, 2017 5:12 pm

Re: walther LP500 windage adjustment

Post by KH250 »

I just read the manual and it says "Correction for shots to the left, turn the adjusting screw counter clockwise " the picture in the manual agrees with this. If the shots are landing to the left of centre turn the adjusting screw counter clockwise.
masaki
Posts: 36
Joined: Sun Jul 13, 2008 9:10 am
Location: Tokyo, Japan

Re: walther LP500 windage adjustment

Post by masaki »

emre-nur wrote: Fri Jul 08, 2022 12:12 pm My pistol seems to shoot to the left.
Looking to the manual it says: "correction to the left, turn the screw to counterclockwise"
Is this my option ...
Yes, that is your option

Masaki
masaki
Posts: 36
Joined: Sun Jul 13, 2008 9:10 am
Location: Tokyo, Japan

Re: walther LP500 windage adjustment

Post by masaki »

Ramon OP wrote: Fri Jul 08, 2022 11:41 pm List of pistol sightment adjustments with explanations on how to do them for each pistol https://www.olympicpistol.com/universal ... heatsheet/
The orientation of the photo of the Walther LP500 rear sight in your web page is confusing.
Screen Shot 2022-07-11 at 20.23.19.jpg
I feel it would be better that the photo on the left side is rotated 180 degrees.

Masaki
User avatar
Ramon OP
Posts: 334
Joined: Fri Feb 09, 2018 7:12 am
Location: Brussels, Belgium
Contact:

Re: walther LP500 windage adjustment

Post by Ramon OP »

Thank you @masaki I'll look into it.
Rover
Posts: 7054
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: walther LP500 windage adjustment

Post by Rover »

What a clusterfuck. Turn the damn thing 15 or 20 clicks and shoot a group. That will tell you everything you need to know.
User avatar
deadeyedick
Posts: 1198
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Re: walther LP500 windage adjustment

Post by deadeyedick »

😂
brent375hh
Posts: 741
Joined: Wed Apr 17, 2013 8:04 am
Location: Minneapolis

Re: walther LP500 windage adjustment

Post by brent375hh »

Rover wrote: Thu Jul 28, 2022 8:47 pm What a clusterfuck. Turn the damn thing 15 or 20 clicks and shoot a group. That will tell you everything you need to know.
Which knob do you turn? Which way do you turn it? Do I need to shoot a group, or just see if it looks off center after a while? What pellets do you recommend for this exercise? Will this method work with a PCP, or is it a SSP technique only?
Rover
Posts: 7054
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: walther LP500 windage adjustment

Post by Rover »

brent375hh wrote: Sat Aug 06, 2022 7:47 pm
Rover wrote: Thu Jul 28, 2022 8:47 pm What a clusterfuck. Turn the damn thing 15 or 20 clicks and shoot a group. That will tell you everything you need to know.
Which knob do you turn? Which way do you turn it? Do I need to shoot a group, or just see if it looks off center after a while? What pellets do you recommend for this exercise? Will this method work with a PCP, or is it a SSP technique only?
I think you need to find another sport. But first get in contact with Conradin, who has fought his way through the existential angst of dealing with the minutiae of these questions and come out the other side a changed man.
David M
Posts: 1676
Joined: Wed Mar 24, 2004 6:43 pm

Re: walther LP500 windage adjustment

Post by David M »

Sight Adjusting tool.jpg
Sight Adjusting tool.jpg (40.89 KiB) Viewed 17220 times
These might help adjusting your sight.
Leon
Posts: 834
Joined: Mon Jul 07, 2008 4:04 am
Location: Sydney, Australia

Re: walther LP500 windage adjustment

Post by Leon »

David M wrote: Sun Aug 07, 2022 10:41 pm Sight Adjusting tool.jpgThese might help adjusting your sight.
Excellent David M !

The South African Army taught me you could solve any problem by the application of brute force and, you're know what, they were right ! :)
Rover
Posts: 7054
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: walther LP500 windage adjustment

Post by Rover »

Yes, the application of force by brutes should perfectly fit the needs of this thread.
Leon
Posts: 834
Joined: Mon Jul 07, 2008 4:04 am
Location: Sydney, Australia

Re: walther LP500 windage adjustment

Post by Leon »

Rover wrote: Fri Aug 12, 2022 10:46 pm Yes, the application of force by brutes should perfectly fit the needs of this thread.
Hahahaha !
Post Reply