Unknown fill adapter

[jconrad2754]

I recently purchased a used Pardini K12. There were wo adapters in the case (see picture). The black is the depressure adapter, the brass is a DIN fill adapter; however it does not fit, the threads do not match. Does anyone recognize what gun this adapter might be for?

[pbrejsa]

The left is morini cm162 propably.

[Rover]

Get back to the seller. He may be wondering, "Where the hell did I put that adapter." Otherwise, sell it here and buy what you need.

[jconrad2754]

The brass is not a Morini 162 since I have a 162, and actually fact used my Morini adapter to fill the Pardini cylinders. Seller is a friend who was organizing an estate sale, and that was the adapter in the Pardini case. Neither of us knows what it is for.

[spektr]

I just saw one on gunbroker

[pbrejsa]

It is possible that the brass piece fits the K12. The Morini has a 24 mm hexagon, an M12x1.25 thread and a 5 mm diameter end pin and a length of 8.5 mm. Of course, I may be wrong. These parts are similar in shape, only according to the picture and without dimensions you will not specify anything.

[pbrejsa]

Pardini Air Filling Adaptor for K12, K10, & Kid Air Pistols

http://www.champchoice.com/store/Main.a ... item=K064C

Pardini Air Discharge Tool for K12/K10

http://www.champchoice.com/store/Main.a ... &item=K066

Pardini adapters are made of both steel or brass.

[eugene]

The brass is not a Morini 162 since I have a 162, and actually fact used my Morini adapter to fill the Pardini cylinders.

FWIW we have exact same looking adapter in our club for Morinis. Filled up using it just yesterday.