Lp50 safe chamber flag

A place to discuss non-discipline specific items, such as mental training, ammo needs, and issues regarding ISSF, USAS, and NRA

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Post Reply
Lablover
Posts: 45
Joined: Fri Sep 13, 2019 12:24 pm

Lp50 safe chamber flag

Post by Lablover »

What’s the best thing to use as a chamber flag for a match for the LP50. I was told weed whip line but not sure it will come out of the side of lp50?

Open to suggestions
David Levene
Posts: 5617
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Re: Lp50 safe chamber flag

Post by David Levene »

The LP5/50 is a problem.

What we tend to say in the UK is that, when going forward to change targets or at other normal times when a flag is required, a length of line should just go across the pistol through the magazine port.

When boxing the pistol then we would expect a length of line to be pushed down the barrel so that it sticks out of the muzzle and can be seen when looking down into the magazine port.
1066
Posts: 31
Joined: Wed Aug 29, 2018 3:57 am

Re: Lp50 safe chamber flag

Post by 1066 »

I've developed a kit that fits the magazine fed air rifles where it's impossible to feed a line right through the barrel (As in ISSF, Rule 6.2.2.2)

Unfortunately no idea if it will fit the LP50 but if there were a few needed I could probably design and make something to suit I'm sure.

Image
Image
Image
Marc Orvin
Posts: 356
Joined: Sat Aug 28, 2004 12:23 am
Location: Colorado

Re: Lp50 safe chamber flag

Post by Marc Orvin »

This is how I do it. Quick and easy and cheap.

Image
Lablover
Posts: 45
Joined: Fri Sep 13, 2019 12:24 pm

Re: Lp50 safe chamber flag

Post by Lablover »

Marc Orvin wrote: Mon Oct 28, 2019 5:25 pm This is how I do it. Quick and easy and cheap.

Image
Ok, that is brilliant! Thank for the tip

Joe
Post Reply