Replacing the rear sight of a Toz35m

[gimgim]

Any suggestion on a cost effective replacement?
(I assume I will need some work to adapt the frame attachment).
I was looking at the sight of the Steyr Evo 10, but buying that new is $300+
Thanks

[JariN]

If you want to keep the original Toz rear sight adjustment system, then you don't need to buy complete rear sight.
Steyr LP10 rear sight carrier was "only" 159 eur when I bought it.

https://www.euroshooting.eu/en/index.ph ... 4001020550

The price may be different from your local dealer...

[Rover]

Upgrade? I think my TOZ sight is just fine, though I did cut the notch into a "U" with a 3/16 inch chainsaw file.

[william]

Upgrade? I think my TOZ sight is just fine, though I did cut the notch into a "U" with a 3/16 inch chainsaw file.

C'mon, Rog, there are points to be bought.

[spektr]

My wooden box of TOZ parts came with 4 or 5 different rear blades. I can't think of what you might want upgrade as it is stone reliable..... Andrew Berryhill sells parts for TOZ sights......

[gimgim]

Upgrade? I think my TOZ sight is just fine, though I did cut the notch into a "U" with a 3/16 inch chainsaw file.

Apparently I didn't make clear I want to upgrade mine, not yours :-)

[gimgim]

My wooden box of TOZ parts came with 4 or 5 different rear blades. I can't think of what you might want upgrade as it is stone reliable..... Andrew Berryhill sells parts for TOZ sights......

Same here, I have two pistols and they both came with all the blades.
I like to work on one of the pistols though, it's a hobby, and now it's time for the sight to go.
The breech lever is next, and then a compensator.

[Ramon OP]

What do you mean by upgrade?

[Ramon OP]

Andrew Berryhill sells parts for TOZ sights......

Here's the link to Andrew's front and rear sight sets for the Toz 35 https://www.precisiontargetpistolgrips. ... _More.html

[gimgim]

What do you mean by upgrade?

Upgrade is probably a poor choice of words, I should have said "change" perhaps.
I like the look of the rear sight in the Steyr Evo 10 and I like that the gap can be adjusted (width and depth) without removing the blade, but as I said, It's mostly to swap parts and modify the pistol for fun

[JariN]

You could also consider Walther SSP rear sight. Costs less than Steyr LP10 or EVO sight...

https://www.schiesssport-buinger.de/sho ... le-for-SSP

[gimgim]

Thanks, it's no longer available

> You might check to see if this guy still has the Pardini sight for sale, at $75-

[Christopher Miceli]

I put the complete morini rear sight on mine. Way better than the toz. Wasn’t cheap or easy.

[Christopher Miceli]

Friend mounted a p44 rear sight

[j danielsson]

That is a matchguns sight on the picture above.

You can easily change the blade to a Pardini blade.
You need 2 screws,for example m2 thread, and 2 nuts to go with them.

[Christopher Miceli]

That is a matchguns sight on the picture above.

You can easily change the blade to a Pardini blade.
You need 2 screws,for example m2 thread, and 2 nuts to go with them.

that is the matchgun, i gotta find the p44 picture now. I did the pardini blade thing.... it was nice but i needed a higher front sight for the sight picture i wanted. It also doesn't alleviate the backwards and elevation knob.