Dry fire not working

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Ling678
Posts: 5
Joined: Fri Jul 13, 2018 4:37 pm

Dry fire not working

Post by Ling678 »

I have a new Evo 10 short barrel. The dry fire was working but is not now. Any advice on how to fix this would be helpful. Thank you.
User avatar
j-team
Posts: 1381
Joined: Mon Mar 28, 2005 2:48 am
Location: New Zealand

Re: Dry fire not working

Post by j-team »

If you just got it new, take it back to where you got it. It's under warranty, don't try fixing it yourself.
atomicgale
Posts: 859
Joined: Fri Mar 10, 2017 7:34 am
Location: Copperhill Tennessee USA (a registered CERCLA superfund site)

Re: Dry fire not working

Post by atomicgale »

Unless you got it from KRALE. Then you're stuck with no customer service.
Silvershooter
Posts: 201
Joined: Fri Jan 06, 2012 9:22 am
Location: North of England

Re: Dry fire not working

Post by Silvershooter »

What are the symptoms ? Does it discharge air when the "T" is visible next to the cocking lever ?
Does it otherwise shoot normally ?
Ling678
Posts: 5
Joined: Fri Jul 13, 2018 4:37 pm

Re: Dry fire not working

Post by Ling678 »

Yes it discharges air when the T is visible. Otherwise it works ok.
User avatar
j-team
Posts: 1381
Joined: Mon Mar 28, 2005 2:48 am
Location: New Zealand

Re: Dry fire not working

Post by j-team »

Silvershooter
Posts: 201
Joined: Fri Jan 06, 2012 9:22 am
Location: North of England

Re: Dry fire not working

Post by Silvershooter »

Yes as j-team says, check this screw is not loose,if it has come loose it will need some thread locker and a good fitting screw driver to tighten.

https://www.youtube.com/watch?v=_GEBx2zYhVc

at 49 secs.
Post Reply