Thank everyone for all of your suggestions.
Target-Air finally got back with me and I have placed my order. In the mean time, I had built a frame to hold the slightly smaller targets for my old trap. I had purchased a trap locally that I had intended to use but it became dented with my standard 480fps pistol. I considered this a safety hazard so I disposed of it. It was rated for pellets at that velocity though. I was very surprised. I am currently shooting so much that the boxes of rags etc wouldn't work because I would be going thru rags and cardboard boxes left and right. I also don't like mickey mouse solutions.
Thanks again for all of the help.
Best Regards,
David Finell
Quiet quality pellet trap in US
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Re: Quiet quality pellet trap in US
You CAN'T shoot through a box of rags unless you put in too few. As you shoot the pellets build up into a solid lump that will stop everything. The more you shoot, the more "bullet-proof" it becomes.
It seems to me the solution is more "elegant" than Mickey Mouse.
It seems to me the solution is more "elegant" than Mickey Mouse.
Re: Quiet quality pellet trap in US
Is the Target Air trap essentially a heavier duty version of the Gamo trap sized for standard targets?
Re: Quiet quality pellet trap in US
Gammo makes several traps. This is a cone style trap built with 3mm steel. It is an extremely heavy duty. Target-Air makes two sizes of this trap. One is a 14cm version. I suspect this is the standard size for rifle targets. The one I ordered is the 17cm version which is the proper size for the kruger ISSF 10M AP targets.
I think I posted a link to the product when I started this thread. Check them out. They seem to make some really nice very heavy duty products.
Best Regards,
David Finell
I think I posted a link to the product when I started this thread. Check them out. They seem to make some really nice very heavy duty products.
Best Regards,
David Finell
Re: Quiet quality pellet trap in US
I looked at the photo, and it looked exactly like my old Gamo trap.
That old Gamo trap was made from thinner steel which was not a real problem except for the deflector at the back. The deflector would deform from hits from a 480 fps air pistol, and eventually shots would bounce back to the shooter.
The old Gamo trap I had would only fit Gamo targets which were not standard 10m targets.
Looks like this is a much more rugged version and the target fixture in the from holds standard targets
That old Gamo trap was made from thinner steel which was not a real problem except for the deflector at the back. The deflector would deform from hits from a 480 fps air pistol, and eventually shots would bounce back to the shooter.
The old Gamo trap I had would only fit Gamo targets which were not standard 10m targets.
Looks like this is a much more rugged version and the target fixture in the from holds standard targets