3/8" to 11mm sight risers / adapters

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
peterleduc
Posts: 80
Joined: Wed Dec 21, 2011 1:15 am

3/8" to 11mm sight risers / adapters

Post by peterleduc »

I would like to put a modern set of sights on a Remington 540xr for my son and need an adapter to go from the 3/8" grooved receiver to the modern 11mm sight base of the rear diaopter. Does anyone know of a commercially available product? I've searched and searched but haven't seen anything yet.

Peter
Gwhite
Posts: 3427
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: 3/8" to 11mm sight risers / adapters

Post by Gwhite »

You might want to post this on the RIFLE forum...

This is the pistol forum.
User avatar
Andre
Posts: 464
Joined: Sun Mar 30, 2014 12:09 pm

Re: 3/8" to 11mm sight risers / adapters

Post by Andre »

I bet some nicely cut shims would work to make up the 60 thou difference.
mtncwru
Posts: 447
Joined: Sun Dec 12, 2010 1:50 pm
Location: San Diego, CA
Contact:

Re: 3/8" to 11mm sight risers / adapters

Post by mtncwru »

Depending on the specific rear sight you're using, it may clamp on without shims or an adapter. I would certainly recommend seeing if it's actually an issue before you go down the adapter/shim road.

If you do need something to take up some space, a piece of aluminum can cut to the appropriate size should do it.
dc.fireman
Posts: 229
Joined: Wed Feb 29, 2012 10:02 pm

Re: 3/8" to 11mm sight risers / adapters

Post by dc.fireman »

Peter - use your browser to search for this guy:

Bill Earnest
Earnest Shooting Products
Post Reply