Load development success

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

Post Reply
jabberwo
Posts: 162
Joined: Sat Sep 27, 2008 9:25 pm
Location: Taxachusetts

Load development success

Post by jabberwo »

The only problem with finding a load your wad gun likes this much at 50yds,
Nosler 185gr JHP, Remington re-used brass, CCI primer, 4.7gr BullsEye.
Nosler 185gr JHP, Remington re-used brass, CCI primer, 4.7gr BullsEye.
4.7gr BE at 50yds.JPG (51.19 KiB) Viewed 3046 times
is that now I know all the 8s, and less, are on me!

Shooting off a rest using my red dot.
Rover
Posts: 7054
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: Load development success

Post by Rover »

Hey, Bickar! You wanna handle this one? I'll shut up.
David Levene
Posts: 5617
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Re: Load development success

Post by David Levene »

I know nothing about .45 calibre but, just out of interest, is this considered to be good grouping?
Misny
Posts: 993
Joined: Tue Mar 02, 2004 9:28 pm
Location: Indiana

Re: Load development success

Post by Misny »

David Levene wrote:I know nothing about .45 calibre but, just out of interest, is this considered to be good grouping?
Considering it was hand held off a bench, using a red dot scope (no magnification) it is a decent group. I've fired the same load from the Ransom rest, from different accurized pistols, and 2" or less is generally what one can expect. I've seen one-hole groups at 50 yards (under an inch) with this load from the machine rest. A ten shot 3 1/2" group at 50 yards will keep them all in the 10 ring.
David Levene
Posts: 5617
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Re: Load development success

Post by David Levene »

Misny wrote:
David Levene wrote:I know nothing about .45 calibre but, just out of interest, is this considered to be good grouping?
Considering it was hand held off a bench, using a red dot scope (no magnification) it is a decent group.
Thanks
jabberwo
Posts: 162
Joined: Sat Sep 27, 2008 9:25 pm
Location: Taxachusetts

Re: Load development success

Post by jabberwo »

I was certainly happy with it. A grain less or more and the group is 50% bigger. And I called the high shot. With my astigmatism, the red dot is more of a figure eight and sometimes I center the wrong part in the black. 1.69" w/o that outlier. :-)
User avatar
john bickar
Posts: 618
Joined: Wed May 05, 2004 3:58 am
Location: Corner of Walk & Don't Walk

Re: Load development success

Post by john bickar »

Rover wrote:Hey, Bickar! You wanna handle this one? I'll shut up.
Is there an expiration date on this offer?
Rover
Posts: 7054
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: Load development success

Post by Rover »

I'll be quiet as long as you keep "handling" it. Also,
http://static.globalnoticias.pt/storage ... =big&pos=0

BTW Jabberwo, presciption glasses (fixing your astigmatism) will magically make your red dot round.
dronning
Posts: 557
Joined: Wed Feb 13, 2013 8:56 pm
Location: MInnesota

Re: Load development success

Post by dronning »

David Levene wrote:I know nothing about .45 calibre but, just out of interest, is this considered to be good grouping?
When gunsmiths test 45acp barrels for accuracy they can get sub 1" accuracy @ 50yds, but it's rare for the .45acp. A well built 1911 can produce 50 yd sub 1.25" 10 shot groups from a machine rest, but they are pricey. Most bullseye shooters would be ecstatic with a sub 2" gun.

- Dave
Certified Safety Instructor: Rifle & Pistol
They that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.
~ Ben Franklin
User avatar
john bickar
Posts: 618
Joined: Wed May 05, 2004 3:58 am
Location: Corner of Walk & Don't Walk

Re: Load development success

Post by john bickar »

Rover wrote:I'll be quiet as long as you keep "handling" it. Also,
http://static.globalnoticias.pt/storage ... =big&pos=0
Heh. Good one :)
User avatar
john bickar
Posts: 618
Joined: Wed May 05, 2004 3:58 am
Location: Corner of Walk & Don't Walk

Re: Load development success

Post by john bickar »

David Levene wrote:
Misny wrote:
David Levene wrote:I know nothing about .45 calibre but, just out of interest, is this considered to be good grouping?
Considering it was hand held off a bench, using a red dot scope (no magnification) it is a decent group.
Thanks
For reference, the NRA conventional pistol target has a 1.695" X-ring and a 3.36" 10-ring (pretty close to one ring larger than the free pistol target, if that makes sense).

So a .45 that shoots a "2-inch group" is an X-ring gun, due to our baffling convention of measuring group size center-to-center while scoring based on inside edge.

Most bullseye shooters can't call their shots within 1 inch at 50 yards, so a 2" gun is fine, but typically High Masters are shooting .45s that are sub-1.5" at 50.
User avatar
rmca
Posts: 1203
Joined: Sun Nov 04, 2012 3:55 pm
Location: Lisbon, Portugal

Re: Load development success

Post by rmca »

john bickar wrote: (pretty close to one ring larger than the free pistol target, if that makes sense).
Loosely translated, close to the nine ring, rigth? :)
john bickar wrote: Most bullseye shooters can't call their shots within 1 inch at 50 yards, so a 2" gun is fine, but typically High Masters are shooting .45s that are sub-1.5" at 50.
What kind of accuracy should one expect at 25yds from those guns? Half the 50yd group or less than that?
User avatar
john bickar
Posts: 618
Joined: Wed May 05, 2004 3:58 am
Location: Corner of Walk & Don't Walk

Re: Load development success

Post by john bickar »

rmca wrote:
john bickar wrote: (pretty close to one ring larger than the free pistol target, if that makes sense).
Loosely translated, close to the nine ring, rigth? :)
Yeah, free pistol 9-ring=100mm=3.93".
rmca wrote:
john bickar wrote: Most bullseye shooters can't call their shots within 1 inch at 50 yards, so a 2" gun is fine, but typically High Masters are shooting .45s that are sub-1.5" at 50.
What kind of accuracy should one expect at 25yds from those guns? Half the 50yd group or less than that?
Almost always better than half the size of the 50yard group. Weird things happen to pistol groups between 25 and 50 yards. I don't know anyone that bothers to Random Rest at 25 yards, though; I certainly don't.

And jabberwo, I didn't mean to imply that yours was a bad group. I'd shoot that gun/load combo.
User avatar
Sa-tevo
Posts: 220
Joined: Sat Mar 09, 2013 8:04 pm
Location: Georgia, USA

Re: Load development success

Post by Sa-tevo »

john bickar wrote: Almost always better than half the size of the 50yard group. Weird things happen to pistol groups between 25 and 50 yards. I don't know anyone that bothers to Random Rest at 25 yards, though; I certainly don't.
It gets frustrating that a lot of US magazines and firearms forums will get all excited about 25 yard Ransom Rest groups. You think you're starting to read something informative and it's all participation ribbons.

I really miss Gil Hebard's testing methods and humor. He would test several serial numbers of the same pistol.
dronning
Posts: 557
Joined: Wed Feb 13, 2013 8:56 pm
Location: MInnesota

Re: Load development success

Post by dronning »

Most 45's should be able to hold the X ring at 25yards - even if you are shooting lubed rocks!

- Dave
Certified Safety Instructor: Rifle & Pistol
They that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.
~ Ben Franklin
KevinGD
Posts: 1
Joined: Thu Aug 13, 2015 1:35 am

Re: Load development success

Post by KevinGD »

FYI on the astigmatism, I find a tiny aperture turns the hourglass red dot into a circle again. And, I can see the front sight, too. A lot cheaper than a new prescription.

Kevin
Post Reply